DIN 471 – 52 mm 止め輪:溝寸法
止め輪 · DIN 471(軸用C形止め輪)
DIN 471 – 52 mm 止め輪(DIN 471, 軸用C形止め輪)には、溝径 49 mm (1.929 in)、幅 2.15 mm (0.0846 in) 以上の溝が必要です。止め輪の厚さは 2 mm (0.0787 in) です。
- d2溝径
- 49 mm1.929 in1.929 in49 mm
- m溝幅(最小)
- 2.15 mm0.0846 in0.0846 in2.15 mm
- s止め輪の厚さ
- 2 mm0.0787 in0.0787 in2 mm
図面
DIN 471 – 52 mmの仕様
| d1軸径 / 穴径 | 52 mm2.047 in |
|---|---|
| d2溝径 | 49 mm1.929 in |
| m溝幅(最小) | 2.15 mm0.0846 in |
| s止め輪の厚さ | 2 mm0.0787 in |
反対側(軸 ↔ 穴)の同じサイズ
止め輪の全サイズ
出典
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
数値は2026年11月15日にこれらの出典と照合しました。 · データの確認方法
計画・識別のための参考値です。製作前に、重要な寸法はメーカーの図面または規格の最新版で必ず確認してください。