U-Profil UPE 100: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche
UPE 100 (UPE: europäische U-Profile, parallele Flansche) ist 100 mm (3,937 in) hoch, mit 55 mm (2,165 in) Flanschbreite, 4,5 mm (0,177 in) Steg und 7,5 mm (0,295 in) Flansch. Masse 9,8 kg/m (6,585 lb/ft), Fläche 12,5 cm² (1,938 in²); um die starke Achse I = 207 cm⁴ (4,97 in⁴), Wel = 41,4 cm³ (2,53 in³).
- hHöhe
- 100 mm3,937 in3,937 in100 mm
- bFlanschbreite
- 55 mm2,165 in2,165 in55 mm
- twStegdicke
- 4,5 mm0,177 in0,177 in4,5 mm
- tfFlanschdicke
- 7,5 mm0,295 in0,295 in7,5 mm
Zeichnung
Technische Daten UPE 100
| hHöhe | 100 mm3,937 in |
|---|---|
| bFlanschbreite | 55 mm2,165 in |
| twStegdicke | 4,5 mm0,177 in |
| tfFlanschdicke | 7,5 mm0,295 in |
| r1Ausrundungsradius | 10 mm0,394 in |
| GMasse | 9,8 kg/m6,585 lb/ft |
| AQuerschnittsfläche | 12,5 cm²1,938 in² |
| eSchwerpunktabstand vom Stegrücken | 1,91 cm0,752 in |
| IyFlächenträgheitsmoment, starke Achse | 207 cm⁴4,97 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 41,4 cm³2,53 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 48 cm³2,93 in³ |
| iyTrägheitsradius, starke Achse | 4,07 cm1,602 in |
| IzFlächenträgheitsmoment, schwache Achse | 38,3 cm⁴0,92 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 11 cm³0,67 in³ |
| izTrägheitsradius, schwache Achse | 1,75 cm0,689 in |
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.