U-Profil UPN 120: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPN: europäische U-Profile, geneigte Flansche (EN 10279, DIN 1026-1)
UPN 120 (UPN: europäische U-Profile, geneigte Flansche, EN 10279, DIN 1026-1) ist 120 mm (4,724 in) hoch, mit 55 mm (2,165 in) Flanschbreite, 7 mm (0,276 in) Steg und 9 mm (0,354 in) Flansch. Masse 13,4 kg/m (9,004 lb/ft), Fläche 17 cm² (2,635 in²); um die starke Achse I = 364 cm⁴ (8,75 in⁴), Wel = 60,7 cm³ (3,7 in³).
- hHöhe
- 120 mm4,724 in4,724 in120 mm
- bFlanschbreite
- 55 mm2,165 in2,165 in55 mm
- twStegdicke
- 7 mm0,276 in0,276 in7 mm
- tfFlanschdicke
- 9 mm0,354 in0,354 in9 mm
Zeichnung
Technische Daten UPN 120
| hHöhe | 120 mm4,724 in |
|---|---|
| bFlanschbreite | 55 mm2,165 in |
| twStegdicke | 7 mm0,276 in |
| tfFlanschdicke | 9 mm0,354 in |
| r1Ausrundungsradius | 9 mm0,354 in |
| r2Flanschkantenradius | 4,5 mm0,177 in |
| GMasse | 13,4 kg/m9,004 lb/ft |
| AQuerschnittsfläche | 17 cm²2,635 in² |
| IyFlächenträgheitsmoment, starke Achse | 364 cm⁴8,75 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 60,7 cm³3,7 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 72,6 cm³4,43 in³ |
| iyTrägheitsradius, starke Achse | 4,62 cm1,819 in |
| IzFlächenträgheitsmoment, schwache Achse | 43,2 cm⁴1,04 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 11 cm³0,67 in³ |
| izTrägheitsradius, schwache Achse | 1,59 cm0,626 in |
Auch bekannt als
U120UNP120
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.