U-Profil UPN 50: Maße und Querschnittswerte

U-Profile (UPN, UPE, PFC, JIS) · UPN: europäische U-Profile, geneigte Flansche (EN 10279, DIN 1026-1)

UPN 50 (UPN: europäische U-Profile, geneigte Flansche, EN 10279, DIN 1026-1) ist 50 mm (1,969 in) hoch, mit 38 mm (1,496 in) Flanschbreite, 5 mm (0,197 in) Steg und 7 mm (0,276 in) Flansch. Masse 5,6 kg/m (3,763 lb/ft), Fläche 7,1 cm² (1,101 in²); um die starke Achse I = 26,4 cm⁴ (0,63 in⁴), Wel = 10,6 cm³ (0,65 in³).

hHöhe
50 mm1,969 in1,969 in50 mm
bFlanschbreite
38 mm1,496 in1,496 in38 mm
twStegdicke
5 mm0,197 in0,197 in5 mm
tfFlanschdicke
7 mm0,276 in0,276 in7 mm

Zeichnung

38 mm1,496 in50 mm1,969 intf 7 mmtf 0,276 intw 5 mmtw 0,197 inr1 7 mmr1 0,276 in
Maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten UPN 50

hHöhe50 mm1,969 in
bFlanschbreite38 mm1,496 in
twStegdicke5 mm0,197 in
tfFlanschdicke7 mm0,276 in
r1Ausrundungsradius7 mm0,276 in
r2Flanschkantenradius3,5 mm0,138 in
GMasse5,6 kg/m3,763 lb/ft
AQuerschnittsfläche7,1 cm²1,101 in²
IyFlächenträgheitsmoment, starke Achse26,4 cm⁴0,63 in⁴
Wel,yElastisches Widerstandsmoment, starke Achse10,6 cm³0,65 in³
Wpl,yPlastisches Widerstandsmoment, starke Achse13,1 cm³0,8 in³
iyTrägheitsradius, starke Achse1,92 cm0,756 in
IzFlächenträgheitsmoment, schwache Achse9,12 cm⁴0,22 in⁴
Wel,zElastisches Widerstandsmoment, schwache Achse4 cm³0,24 in³
izTrägheitsradius, schwache Achse1,13 cm0,445 in

Auch bekannt als

U50UNP50

Alle Größen von U-Profile (UPN, UPE, PFC, JIS)

Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →

Quellen

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.