DIN 6799 – 1.5 止め輪:溝寸法
止め輪 · DIN 6799(E形止め輪)
DIN 6799 – 1.5 止め輪(DIN 6799, E形止め輪)には、溝径 1.5 mm (0.059 in)、幅 0.44 mm (0.0173 in) 以上の溝が必要です。止め輪の厚さは 0.4 mm (0.0157 in) です。
- d2溝径
- 1.5 mm0.059 in0.059 in1.5 mm
- m溝幅(最小)
- 0.44 mm0.0173 in0.0173 in0.44 mm
- s止め輪の厚さ
- 0.4 mm0.0157 in0.0157 in0.4 mm
図面
DIN 6799 – 1.5の仕様
| d1適用軸径(E形) | 2–2.5 mm0.079–0.098 in |
|---|---|
| d2溝径 | 1.5 mm0.059 in |
| m溝幅(最小) | 0.44 mm0.0173 in |
| s止め輪の厚さ | 0.4 mm0.0157 in |
止め輪の全サイズ
出典
- DIN 471:2011, Retaining rings for shafts, normal type and heavy type
- DIN 472:2011, Retaining rings for bores, normal type and heavy type
- DIN 6799:2017, Retaining washers for shafts (E-rings)
- Westfield Fasteners: External circlips DIN 471 table
- Westfield Fasteners: E-clips DIN 6799 table
- AmesWeb: Internal circlip dimensions for bores (DIN 472)
- Würth: Circlips DIN 471, product data
数値は2026年11月15日にこれらの出典と照合しました。 · データの確認方法
計画・識別のための参考値です。製作前に、重要な寸法はメーカーの図面または規格の最新版で必ず確認してください。