DIN 6799 – 1.5 Circlip Groove Dimensions

Retaining Rings · DIN 6799: E-clips (retaining washers)

The DIN 6799 – 1.5 ring (DIN 6799: E-clips, retaining washers) needs a groove 1.5 mm (0.059 in) in diameter and at least 0.44 mm (0.0173 in) wide. The ring itself is 0.4 mm (0.0157 in) thick.

d2Groove diameter
1.5 mm0.059 in0.059 in1.5 mm
mGroove width (min)
0.44 mm0.0173 in0.0173 in0.44 mm
sRing thickness
0.4 mm0.0157 in0.0157 in0.4 mm

Drawing

⌀2 mm⌀0.079 in
m 0.44 mmm 0.0173 int 0.25 mmt 0.0098 ins 0.4 mms 0.0157 inShaft surfacegroove ⌀1.5 mmgroove ⌀0.059 in
Left: ring outline schematic, diameter to scale. Right: groove detail, magnified.Proportions shown, not to scale · Dimensions in mmDimensions in inches

DIN 6799 – 1.5 specifications

d1Shaft range (E-clip)2–2.5 mm0.079–0.098 in
d2Groove diameter1.5 mm0.059 in
mGroove width (min)0.44 mm0.0173 in
sRing thickness0.4 mm0.0157 in

All Retaining Rings sizes

Compare all 126 sizes in the Retaining Rings chart →

Sources

  1. DIN 471:2011, Retaining rings for shafts, normal type and heavy type
  2. DIN 472:2011, Retaining rings for bores, normal type and heavy type
  3. DIN 6799:2017, Retaining washers for shafts (E-rings)
  4. Westfield Fasteners: External circlips DIN 471 table
  5. Westfield Fasteners: E-clips DIN 6799 table
  6. AmesWeb: Internal circlip dimensions for bores (DIN 472)
  7. Würth: Circlips DIN 471, product data

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.