S355J2 강: 대응 강종과 성분
강종 · 구조용강(EN 10025-2, ASTM)
S355J2 구조용강의 최소 항복 강도는 355 MPa (51 ksi), 인장 강도는 470–630 MPa (68–91 ksi)입니다. 근사 대응: ASTM ≈A572 Gr 50, JIS ≈SM490B, KS ≈SM355B, GB ≈Q355D.
- EN 명칭
- S355J2
- EN 번호(W.Nr)
- 1.0577
- JIS
- ≈SM490B
- C %
- ≤ 0.20
도면
S355J2 사양
| ASTM/AISI 대응 | ≈A572 Gr 50 |
|---|---|
| EN 명칭 | S355J2 |
| EN 번호(W.Nr) | 1.0577 |
| JIS | ≈SM490B |
| KS | ≈SM355B |
| GB(중국) | ≈Q355D |
| C % | ≤ 0.20 |
| Mn % | ≤ 1.60 |
| 기타 원소 % | Si ≤ 0.55 |
| 최소 항복 강도 | 355 MPa51 ksi |
| 인장 강도 | 470–630 MPa (68–91 ksi) |
S355J2(구 DIN St52-3)는 유럽의 표준 고강도 구조용강입니다. 중국의 Q355는 GB/T 1591-2018에서 Q345를 대체했으며, Q355D가 J2의 −20 °C 충격 시험에 해당합니다.
다른 이름
S355St521.0577Q355Q345
유사 강종
강종 전체 규격
출처
- SAE J403: Chemical compositions of SAE carbon steels; SAE J404: Chemical compositions of SAE alloy steels
- ASTM A240/A240M: Chromium and chromium-nickel stainless steel plate, sheet and strip
- Wikipedia: SAE steel grades (stainless composition table, AISI/SAE ranges)
- Wikipedia: 41xx steel (4130, 4140 composition)
- ASTM A681: Tool steels alloy
- EN 10088-1: Stainless steels, list of stainless steels (names and numbers)
- EN 10025-2:2019, Hot rolled products of structural steels, non-alloy structural steels
- ISO 4957:2018, Tool steels
- JIS G 4303 / G 4051 / G 4053 / G 4404: stainless, carbon, alloy and tool steels (JISC)
- GB/T 20878-2007: Stainless and heat-resisting steels, designation and chemical composition
2026년 11월 15일에 이 출처들과 마지막으로 대조 확인한 수치입니다. · 데이터 확인 방법
계획 및 식별용 참고값입니다. 생산 전에 중요한 치수는 제조사 도면이나 표준의 최신판으로 반드시 확인하십시오.