S355J2 Steel: Equivalents and Composition

Steel Grades · Structural steels (EN 10025-2, ASTM)

S355J2 structural steel has a minimum yield strength of 355 MPa (51 ksi) and a tensile strength of 470–630 MPa (68–91 ksi). Near equivalents: ASTM ≈A572 Gr 50, JIS ≈SM490B, KS ≈SM355B, GB ≈Q355D.

EN name
S355J2
EN number (W.Nr)
1.0577
JIS
≈SM490B
C %
≤ 0.20

Drawing

S355J2, %C00.81.6≤ 0.20Mn01.12.2≤ 1.60
Specified range of the key alloying elements, % by weight (each element on its own scale)Proportions shown, not to scale

S355J2 specifications

ASTM / AISI equivalent≈A572 Gr 50
EN nameS355J2
EN number (W.Nr)1.0577
JIS≈SM490B
KS≈SM355B
GB (China)≈Q355D
C %≤ 0.20
Mn %≤ 1.60
Other elements %Si ≤ 0.55
Min. yield strength355 MPa51 ksi
Tensile strength470–630 MPa (68–91 ksi)

S355J2 (old DIN St52-3) is the standard higher-strength structural steel in Europe. China's Q355 replaced Q345 in GB/T 1591-2018; Q355D corresponds to the −20 °C impact test of J2.

Also known as

S355St521.0577Q355Q345

Similar grades

All Steel Grades sizes

Compare all 36 sizes in the Steel Grades chart →

Sources

  1. SAE J403: Chemical compositions of SAE carbon steels; SAE J404: Chemical compositions of SAE alloy steels
  2. ASTM A240/A240M: Chromium and chromium-nickel stainless steel plate, sheet and strip
  3. Wikipedia: SAE steel grades (stainless composition table, AISI/SAE ranges)
  4. Wikipedia: 41xx steel (4130, 4140 composition)
  5. ASTM A681: Tool steels alloy
  6. EN 10088-1: Stainless steels, list of stainless steels (names and numbers)
  7. EN 10025-2:2019, Hot rolled products of structural steels, non-alloy structural steels
  8. ISO 4957:2018, Tool steels
  9. JIS G 4303 / G 4051 / G 4053 / G 4404: stainless, carbon, alloy and tool steels (JISC)
  10. GB/T 20878-2007: Stainless and heat-resisting steels, designation and chemical composition

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.