U-Profil UPE 220: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche
UPE 220 (UPE: europäische U-Profile, parallele Flansche) ist 220 mm (8,661 in) hoch, mit 85 mm (3,346 in) Flanschbreite, 6,5 mm (0,256 in) Steg und 12 mm (0,472 in) Flansch. Masse 26,6 kg/m (17,874 lb/ft), Fläche 33,9 cm² (5,255 in²); um die starke Achse I = 2.680 cm⁴ (64,39 in⁴), Wel = 244 cm³ (14,89 in³).
- hHöhe
- 220 mm8,661 in8,661 in220 mm
- bFlanschbreite
- 85 mm3,346 in3,346 in85 mm
- twStegdicke
- 6,5 mm0,256 in0,256 in6,5 mm
- tfFlanschdicke
- 12 mm0,472 in0,472 in12 mm
Zeichnung
Technische Daten UPE 220
| hHöhe | 220 mm8,661 in |
|---|---|
| bFlanschbreite | 85 mm3,346 in |
| twStegdicke | 6,5 mm0,256 in |
| tfFlanschdicke | 12 mm0,472 in |
| r1Ausrundungsradius | 13 mm0,512 in |
| GMasse | 26,6 kg/m17,874 lb/ft |
| AQuerschnittsfläche | 33,9 cm²5,255 in² |
| eSchwerpunktabstand vom Stegrücken | 2,7 cm1,063 in |
| IyFlächenträgheitsmoment, starke Achse | 2.680 cm⁴64,39 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 244 cm³14,89 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 281 cm³17,15 in³ |
| iyTrägheitsradius, starke Achse | 8,9 cm3,504 in |
| IzFlächenträgheitsmoment, schwache Achse | 247 cm⁴5,93 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 43 cm³2,62 in³ |
| izTrägheitsradius, schwache Achse | 2,7 cm1,063 in |
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.