U-Profil UPE 200: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche
UPE 200 (UPE: europäische U-Profile, parallele Flansche) ist 200 mm (7,874 in) hoch, mit 80 mm (3,150 in) Flanschbreite, 6 mm (0,236 in) Steg und 11 mm (0,433 in) Flansch. Masse 22,8 kg/m (15,321 lb/ft), Fläche 29 cm² (4,495 in²); um die starke Achse I = 1.910 cm⁴ (45,89 in⁴), Wel = 191 cm³ (11,66 in³).
- hHöhe
- 200 mm7,874 in7,874 in200 mm
- bFlanschbreite
- 80 mm3,150 in3,150 in80 mm
- twStegdicke
- 6 mm0,236 in0,236 in6 mm
- tfFlanschdicke
- 11 mm0,433 in0,433 in11 mm
Zeichnung
Technische Daten UPE 200
| hHöhe | 200 mm7,874 in |
|---|---|
| bFlanschbreite | 80 mm3,150 in |
| twStegdicke | 6 mm0,236 in |
| tfFlanschdicke | 11 mm0,433 in |
| r1Ausrundungsradius | 13 mm0,512 in |
| GMasse | 22,8 kg/m15,321 lb/ft |
| AQuerschnittsfläche | 29 cm²4,495 in² |
| eSchwerpunktabstand vom Stegrücken | 2,56 cm1,008 in |
| IyFlächenträgheitsmoment, starke Achse | 1.910 cm⁴45,89 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 191 cm³11,66 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 220 cm³13,43 in³ |
| iyTrägheitsradius, starke Achse | 8,11 cm3,193 in |
| IzFlächenträgheitsmoment, schwache Achse | 187 cm⁴4,49 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 35 cm³2,14 in³ |
| izTrägheitsradius, schwache Achse | 2,54 cm1,000 in |
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.