U-Profil UPE 330: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche
UPE 330 (UPE: europäische U-Profile, parallele Flansche) ist 330 mm (12,992 in) hoch, mit 105 mm (4,134 in) Flanschbreite, 11 mm (0,433 in) Steg und 16 mm (0,630 in) Flansch. Masse 53,2 kg/m (35,749 lb/ft), Fläche 67,8 cm² (10,509 in²); um die starke Achse I = 11.000 cm⁴ (264,28 in⁴), Wel = 667 cm³ (40,7 in³).
- hHöhe
- 330 mm12,992 in12,992 in330 mm
- bFlanschbreite
- 105 mm4,134 in4,134 in105 mm
- twStegdicke
- 11 mm0,433 in0,433 in11 mm
- tfFlanschdicke
- 16 mm0,630 in0,630 in16 mm
Zeichnung
Technische Daten UPE 330
| hHöhe | 330 mm12,992 in |
|---|---|
| bFlanschbreite | 105 mm4,134 in |
| twStegdicke | 11 mm0,433 in |
| tfFlanschdicke | 16 mm0,630 in |
| r1Ausrundungsradius | 18 mm0,709 in |
| GMasse | 53,2 kg/m35,749 lb/ft |
| AQuerschnittsfläche | 67,8 cm²10,509 in² |
| eSchwerpunktabstand vom Stegrücken | 2,9 cm1,142 in |
| IyFlächenträgheitsmoment, starke Achse | 11.000 cm⁴264,28 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 667 cm³40,7 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 792 cm³48,33 in³ |
| iyTrägheitsradius, starke Achse | 12,7 cm5,000 in |
| IzFlächenträgheitsmoment, schwache Achse | 681 cm⁴16,36 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 90 cm³5,49 in³ |
| izTrägheitsradius, schwache Achse | 3,17 cm1,248 in |
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.