UPE 330 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges
UPE 330 (UPE: European channels, parallel flanges) is 330 mm (12.992 in) deep with a 105 mm (4.134 in) flange, a 11 mm (0.433 in) web and a 16 mm (0.630 in) flange. Mass 53.2 kg/m (35.749 lb/ft), area 67.8 cm² (10.509 in²); strong-axis I = 11,000 cm⁴ (264.28 in⁴), Wel = 667 cm³ (40.7 in³).
- hDepth
- 330 mm12.992 in12.992 in330 mm
- bFlange width
- 105 mm4.134 in4.134 in105 mm
- twWeb thickness
- 11 mm0.433 in0.433 in11 mm
- tfFlange thickness
- 16 mm0.630 in0.630 in16 mm
Drawing
UPE 330 specifications
| hDepth | 330 mm12.992 in |
|---|---|
| bFlange width | 105 mm4.134 in |
| twWeb thickness | 11 mm0.433 in |
| tfFlange thickness | 16 mm0.630 in |
| r1Root radius | 18 mm0.709 in |
| GMass | 53.2 kg/m35.749 lb/ft |
| AArea | 67.8 cm²10.509 in² |
| eCentroid from back of web | 2.9 cm1.142 in |
| IyMoment of inertia, strong axis | 11,000 cm⁴264.28 in⁴ |
| Wel,yElastic modulus, strong axis | 667 cm³40.7 in³ |
| Wpl,yPlastic modulus, strong axis | 792 cm³48.33 in³ |
| iyRadius of gyration, strong axis | 12.7 cm5.000 in |
| IzMoment of inertia, weak axis | 681 cm⁴16.36 in⁴ |
| Wel,zElastic modulus, weak axis | 90 cm³5.49 in³ |
| izRadius of gyration, weak axis | 3.17 cm1.248 in |
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.