U-Profil UPE 400: Maße und Querschnittswerte

U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche

UPE 400 (UPE: europäische U-Profile, parallele Flansche) ist 400 mm (15,748 in) hoch, mit 115 mm (4,528 in) Flanschbreite, 13,5 mm (0,531 in) Steg und 18 mm (0,709 in) Flansch. Masse 72,2 kg/m (48,516 lb/ft), Fläche 91,9 cm² (14,245 in²); um die starke Achse I = 21.000 cm⁴ (504,53 in⁴), Wel = 1.050 cm³ (64,07 in³).

hHöhe
400 mm15,748 in15,748 in400 mm
bFlanschbreite
115 mm4,528 in4,528 in115 mm
twStegdicke
13,5 mm0,531 in0,531 in13,5 mm
tfFlanschdicke
18 mm0,709 in0,709 in18 mm

Zeichnung

115 mm4,528 in400 mm15,748 intf 18 mmtf 0,709 intw 13,5 mmtw 0,531 ine 2,98 cme 1,173 in
Maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten UPE 400

hHöhe400 mm15,748 in
bFlanschbreite115 mm4,528 in
twStegdicke13,5 mm0,531 in
tfFlanschdicke18 mm0,709 in
r1Ausrundungsradius18 mm0,709 in
GMasse72,2 kg/m48,516 lb/ft
AQuerschnittsfläche91,9 cm²14,245 in²
eSchwerpunktabstand vom Stegrücken2,98 cm1,173 in
IyFlächenträgheitsmoment, starke Achse21.000 cm⁴504,53 in⁴
Wel,yElastisches Widerstandsmoment, starke Achse1.050 cm³64,07 in³
Wpl,yPlastisches Widerstandsmoment, starke Achse1.260 cm³76,89 in³
iyTrägheitsradius, starke Achse15,1 cm5,945 in
IzFlächenträgheitsmoment, schwache Achse1.040 cm⁴24,99 in⁴
Wel,zElastisches Widerstandsmoment, schwache Achse123 cm³7,51 in³
izTrägheitsradius, schwache Achse3,37 cm1,327 in

U-Profile etwa gleicher Höhe in anderen Reihen

Alle Größen von U-Profile (UPN, UPE, PFC, JIS)

Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →

Quellen

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.