UPE 400 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges

UPE 400 (UPE: European channels, parallel flanges) is 400 mm (15.748 in) deep with a 115 mm (4.528 in) flange, a 13.5 mm (0.531 in) web and a 18 mm (0.709 in) flange. Mass 72.2 kg/m (48.516 lb/ft), area 91.9 cm² (14.245 in²); strong-axis I = 21,000 cm⁴ (504.53 in⁴), Wel = 1,050 cm³ (64.07 in³).

hDepth
400 mm15.748 in15.748 in400 mm
bFlange width
115 mm4.528 in4.528 in115 mm
twWeb thickness
13.5 mm0.531 in0.531 in13.5 mm
tfFlange thickness
18 mm0.709 in0.709 in18 mm

Drawing

115 mm4.528 in400 mm15.748 intf 18 mmtf 0.709 intw 13.5 mmtw 0.531 ine 2.98 cme 1.173 in
Drawn to scale · Dimensions in mmDimensions in inches

UPE 400 specifications

hDepth400 mm15.748 in
bFlange width115 mm4.528 in
twWeb thickness13.5 mm0.531 in
tfFlange thickness18 mm0.709 in
r1Root radius18 mm0.709 in
GMass72.2 kg/m48.516 lb/ft
AArea91.9 cm²14.245 in²
eCentroid from back of web2.98 cm1.173 in
IyMoment of inertia, strong axis21,000 cm⁴504.53 in⁴
Wel,yElastic modulus, strong axis1,050 cm³64.07 in³
Wpl,yPlastic modulus, strong axis1,260 cm³76.89 in³
iyRadius of gyration, strong axis15.1 cm5.945 in
IzMoment of inertia, weak axis1,040 cm⁴24.99 in⁴
Wel,zElastic modulus, weak axis123 cm³7.51 in³
izRadius of gyration, weak axis3.37 cm1.327 in

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.