Modul 1.75 Zahnrad: Maße

Zahnradmodule · Module nach ISO 54, Reihe I und II

Ein Zahnrad mit Modul 1.75 hat eine Teilung von 5,498 mm (0,2164 in) und eine Zahnhöhe von 3,9375 mm (0,1550 in), Kopfhöhe 1,75 mm (0,0689 in), Fußhöhe 2,1875 mm (0,0861 in) beim Bezugsprofil nach ISO 53 mit 20° Eingriffswinkel. Teilkreisdurchmesser = Zähnezahl × 1,75 mm. Der entsprechende Diametral Pitch ist 14,51: das nächste Zollzahnrad, 14 DP, kämmt nicht damit.

mModul
1,75 mm0,0689 in0,0689 in1,75 mm
pTeilung (πm)
5,498 mm0,2164 in0,2164 in5,498 mm
hZahnhöhe (2.25 m)
3,9375 mm0,1550 in0,1550 in3,9375 mm
DPEntsprechender Diametral Pitch (25.4/m)
14,51

Zeichnung

Profilbezugsliniep 5,498 mmp 0,2164 ins 2,749 mms 0,1082 inh 3,9375 mmh 0,1550 inha 1,75 mmha 0,0689 inhf 2,1875 mmhf 0,0861 in20°
KopfkreisTeilkreisGrundkreisFußkreisZahnrad mit 20 Zähnen, Evolventenflanken
Proportional, nicht maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten Modul 1.75

mModul1,75 mm0,0689 in
ReiheII
pTeilung (πm)5,498 mm0,2164 in
sZahndicke (πm/2)2,749 mm0,1082 in
haKopfhöhe (1 m)1,75 mm0,0689 in
hfFußhöhe (1.25 m)2,1875 mm0,0861 in
hZahnhöhe (2.25 m)3,9375 mm0,1550 in
cKopfspiel (0.25 m)0,4375 mm0,0172 in
DPEntsprechender Diametral Pitch (25.4/m)14,51
Nächster Norm-DP14

Auch bekannt als

M1.75MOD1.75

Alle Zahnradmodule

Alle 37 Module in der Tabelle Zahnradmodule vergleichen →

Quellen

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.