Module 1.75 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1.75 gear has a circular pitch of 5.498 mm (0.2164 in) and a whole tooth depth of 3.9375 mm (0.1550 in), addendum 1.75 mm (0.0689 in), dedendum 2.1875 mm (0.0861 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1.75 mm. The equivalent diametral pitch is 14.51. The nearest inch gear, 14 DP, does not mesh with it.

mModule
1.75 mm0.0689 in0.0689 in1.75 mm
pCircular pitch (πm)
5.498 mm0.2164 in0.2164 in5.498 mm
hWhole depth (2.25 m)
3.9375 mm0.1550 in0.1550 in3.9375 mm
DPEquivalent diametral pitch (25.4/m)
14.51

Drawing

Pitch linep 5.498 mmp 0.2164 ins 2.749 mms 0.1082 inh 3.9375 mmh 0.1550 inha 1.75 mmha 0.0689 inhf 2.1875 mmhf 0.0861 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1.75 specifications

mModule1.75 mm0.0689 in
SeriesII
pCircular pitch (πm)5.498 mm0.2164 in
sTooth thickness (πm/2)2.749 mm0.1082 in
haAddendum (1 m)1.75 mm0.0689 in
hfDedendum (1.25 m)2.1875 mm0.0861 in
hWhole depth (2.25 m)3.9375 mm0.1550 in
cBottom clearance (0.25 m)0.4375 mm0.0172 in
DPEquivalent diametral pitch (25.4/m)14.51
Nearest standard DP14

Also known as

M1.75MOD1.75

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.