Modul 2.25 Zahnrad: Maße

Zahnradmodule · Module nach ISO 54, Reihe I und II

Ein Zahnrad mit Modul 2.25 hat eine Teilung von 7,069 mm (0,2783 in) und eine Zahnhöhe von 5,0625 mm (0,1993 in), Kopfhöhe 2,25 mm (0,0886 in), Fußhöhe 2,8125 mm (0,1107 in) beim Bezugsprofil nach ISO 53 mit 20° Eingriffswinkel. Teilkreisdurchmesser = Zähnezahl × 2,25 mm. Der entsprechende Diametral Pitch ist 11,29: das nächste Zollzahnrad, 12 DP, kämmt nicht damit.

mModul
2,25 mm0,0886 in0,0886 in2,25 mm
pTeilung (πm)
7,069 mm0,2783 in0,2783 in7,069 mm
hZahnhöhe (2.25 m)
5,0625 mm0,1993 in0,1993 in5,0625 mm
DPEntsprechender Diametral Pitch (25.4/m)
11,29

Zeichnung

Profilbezugsliniep 7,069 mmp 0,2783 ins 3,534 mms 0,1391 inh 5,0625 mmh 0,1993 inha 2,25 mmha 0,0886 inhf 2,8125 mmhf 0,1107 in20°
KopfkreisTeilkreisGrundkreisFußkreisZahnrad mit 20 Zähnen, Evolventenflanken
Proportional, nicht maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten Modul 2.25

mModul2,25 mm0,0886 in
ReiheII
pTeilung (πm)7,069 mm0,2783 in
sZahndicke (πm/2)3,534 mm0,1391 in
haKopfhöhe (1 m)2,25 mm0,0886 in
hfFußhöhe (1.25 m)2,8125 mm0,1107 in
hZahnhöhe (2.25 m)5,0625 mm0,1993 in
cKopfspiel (0.25 m)0,5625 mm0,0221 in
DPEntsprechender Diametral Pitch (25.4/m)11,29
Nächster Norm-DP12

Auch bekannt als

M2.25MOD2.25

Alle Zahnradmodule

Alle 37 Module in der Tabelle Zahnradmodule vergleichen →

Quellen

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.