Module 2.25 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 2.25 gear has a circular pitch of 7.069 mm (0.2783 in) and a whole tooth depth of 5.0625 mm (0.1993 in), addendum 2.25 mm (0.0886 in), dedendum 2.8125 mm (0.1107 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 2.25 mm. The equivalent diametral pitch is 11.29. The nearest inch gear, 12 DP, does not mesh with it.

mModule
2.25 mm0.0886 in0.0886 in2.25 mm
pCircular pitch (πm)
7.069 mm0.2783 in0.2783 in7.069 mm
hWhole depth (2.25 m)
5.0625 mm0.1993 in0.1993 in5.0625 mm
DPEquivalent diametral pitch (25.4/m)
11.29

Drawing

Pitch linep 7.069 mmp 0.2783 ins 3.534 mms 0.1391 inh 5.0625 mmh 0.1993 inha 2.25 mmha 0.0886 inhf 2.8125 mmhf 0.1107 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 2.25 specifications

mModule2.25 mm0.0886 in
SeriesII
pCircular pitch (πm)7.069 mm0.2783 in
sTooth thickness (πm/2)3.534 mm0.1391 in
haAddendum (1 m)2.25 mm0.0886 in
hfDedendum (1.25 m)2.8125 mm0.1107 in
hWhole depth (2.25 m)5.0625 mm0.1993 in
cBottom clearance (0.25 m)0.5625 mm0.0221 in
DPEquivalent diametral pitch (25.4/m)11.29
Nearest standard DP12

Also known as

M2.25MOD2.25

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.