Träger W10×19: Maße und Querschnittswerte
W-Profile (AISC) · W10: 10 in Nennhöhe
W10×19 ist ein AISC-Breitflanschprofil (W10: 10 in Nennhöhe). Es ist 10,2 in (259,1 mm) hoch, mit einem 4,02 in (102,1 mm) breiten Flansch, 0,25 in (6,4 mm) Stegdicke und 0,395 in (10,0 mm) Flanschdicke, und wiegt 19 lb/ft (28,3 kg/m). Fläche 5,62 in² (3.626 mm²); um die starke Achse Ix = 96,3 in⁴ (4.008,3 cm⁴), Sx = 18,8 in³ (308,1 cm³), Zx = 21,6 in³ (354 cm³).
- dHöhe
- 259,1 mm10,2 in10,2 in259,1 mm
- bfFlanschbreite
- 102,1 mm4,02 in4,02 in102,1 mm
- twStegdicke
- 6,4 mm0,25 in0,25 in6,4 mm
- tfFlanschdicke
- 10,0 mm0,395 in0,395 in10,0 mm
Zeichnung
Technische Daten W10×19
| dHöhe | 10,2 in259,1 mm |
|---|---|
| bfFlanschbreite | 4,02 in102,1 mm |
| twStegdicke | 0,25 in6,4 mm |
| tfFlanschdicke | 0,395 in10,0 mm |
| kBemessungswert | 0,695 in17,7 mm |
| kDetaillierungswert | 15/16 in23,8 mm |
| k1Detaillierungswert | 5/8 in15,9 mm |
| WGewicht | 19 lb/ft28,3 kg/m |
| AQuerschnittsfläche | 5,62 in²3.626 mm² |
| IxFlächenträgheitsmoment, starke Achse | 96,3 in⁴4.008,3 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 21,6 in³354 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 18,8 in³308,1 cm³ |
| rxTrägheitsradius, starke Achse | 4,14 in105,2 mm |
| IyFlächenträgheitsmoment, schwache Achse | 4,29 in⁴178,6 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 3,35 in³54,9 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 2,14 in³35,1 cm³ |
| ryTrägheitsradius, schwache Achse | 0,87 in22,2 mm |
| JTorsionsträgheitsmoment | 0,233 in⁴9,7 cm⁴ |
| bf/2tfFlanschschlankheit | 5,09 |
| h/twStegschlankheit | 35,4 |
| Metrische Bezeichnung | W250×28.4 |
Auch bekannt als
W250×28.4
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.