W10×19 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×19 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.2 in (259.1 mm) deep with a 4.02 in (102.1 mm) flange, a 0.25 in (6.4 mm) web and a 0.395 in (10.0 mm) flange, and weighs 19 lb/ft (28.3 kg/m). Area 5.62 in² (3,626 mm²); strong-axis Ix = 96.3 in⁴ (4,008.3 cm⁴), Sx = 18.8 in³ (308.1 cm³), Zx = 21.6 in³ (354 cm³).

dDepth
259.1 mm10.2 in10.2 in259.1 mm
bfFlange width
102.1 mm4.02 in4.02 in102.1 mm
twWeb thickness
6.4 mm0.25 in0.25 in6.4 mm
tfFlange thickness
10.0 mm0.395 in0.395 in10.0 mm

Drawing

102.1 mm4.02 in259.1 mm10.2 intf 10.0 mmtf 0.395 intw 6.4 mmtw 0.25 ink 17.7 mmk 0.695 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×19 specifications

dDepth10.2 in259.1 mm
bfFlange width4.02 in102.1 mm
twWeb thickness0.25 in6.4 mm
tfFlange thickness0.395 in10.0 mm
kDesign value0.695 in17.7 mm
kDetailing value15/16 in23.8 mm
k1Detailing value5/8 in15.9 mm
WWeight19 lb/ft28.3 kg/m
AArea5.62 in²3,626 mm²
IxMoment of inertia, strong axis96.3 in⁴4,008.3 cm⁴
ZxPlastic modulus, strong axis21.6 in³354 cm³
SxSection modulus, strong axis18.8 in³308.1 cm³
rxRadius of gyration, strong axis4.14 in105.2 mm
IyMoment of inertia, weak axis4.29 in⁴178.6 cm⁴
ZyPlastic modulus, weak axis3.35 in³54.9 cm³
SySection modulus, weak axis2.14 in³35.1 cm³
ryRadius of gyration, weak axis0.87 in22.2 mm
JTorsional constant0.233 in⁴9.7 cm⁴
bf/2tfFlange slenderness5.09
h/twWeb slenderness35.4
Metric designationW250×28.4

Also known as

W250×28.4

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.