Träger W14×82: Maße und Querschnittswerte
W-Profile (AISC) · W14: 14 in Nennhöhe
W14×82 ist ein AISC-Breitflanschprofil (W14: 14 in Nennhöhe). Es ist 14,3 in (363,2 mm) hoch, mit einem 10,1 in (256,5 mm) breiten Flansch, 0,51 in (13,0 mm) Stegdicke und 0,855 in (21,7 mm) Flanschdicke, und wiegt 82 lb/ft (122,0 kg/m). Fläche 24 in² (15.484 mm²); um die starke Achse Ix = 881 in⁴ (36.670 cm⁴), Sx = 123 in³ (2.015,6 cm³), Zx = 139 in³ (2.277,8 cm³).
- dHöhe
- 363,2 mm14,3 in14,3 in363,2 mm
- bfFlanschbreite
- 256,5 mm10,1 in10,1 in256,5 mm
- twStegdicke
- 13,0 mm0,51 in0,51 in13,0 mm
- tfFlanschdicke
- 21,7 mm0,855 in0,855 in21,7 mm
Zeichnung
Technische Daten W14×82
| dHöhe | 14,3 in363,2 mm |
|---|---|
| bfFlanschbreite | 10,1 in256,5 mm |
| twStegdicke | 0,51 in13,0 mm |
| tfFlanschdicke | 0,855 in21,7 mm |
| kBemessungswert | 1,45 in36,8 mm |
| kDetaillierungswert | 1 11/16 in42,9 mm |
| k1Detaillierungswert | 1 1/16 in27,0 mm |
| WGewicht | 82 lb/ft122,0 kg/m |
| AQuerschnittsfläche | 24 in²15.484 mm² |
| IxFlächenträgheitsmoment, starke Achse | 881 in⁴36.670 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 139 in³2.277,8 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 123 in³2.015,6 cm³ |
| rxTrägheitsradius, starke Achse | 6,05 in153,7 mm |
| IyFlächenträgheitsmoment, schwache Achse | 148 in⁴6.160,2 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 44,8 in³734,1 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 29,3 in³480,1 cm³ |
| ryTrägheitsradius, schwache Achse | 2,48 in63,0 mm |
| JTorsionsträgheitsmoment | 5,07 in⁴211,03 cm⁴ |
| bf/2tfFlanschschlankheit | 5,92 |
| h/twStegschlankheit | 22,4 |
| Metrische Bezeichnung | W360×122 |
Auch bekannt als
W360×122
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.