W14×82 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×82 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.3 in (363.2 mm) deep with a 10.1 in (256.5 mm) flange, a 0.51 in (13.0 mm) web and a 0.855 in (21.7 mm) flange, and weighs 82 lb/ft (122.0 kg/m). Area 24 in² (15,484 mm²); strong-axis Ix = 881 in⁴ (36,670 cm⁴), Sx = 123 in³ (2,015.6 cm³), Zx = 139 in³ (2,277.8 cm³).

dDepth
363.2 mm14.3 in14.3 in363.2 mm
bfFlange width
256.5 mm10.1 in10.1 in256.5 mm
twWeb thickness
13.0 mm0.51 in0.51 in13.0 mm
tfFlange thickness
21.7 mm0.855 in0.855 in21.7 mm

Drawing

256.5 mm10.1 in363.2 mm14.3 intf 21.7 mmtf 0.855 intw 13.0 mmtw 0.51 ink 36.8 mmk 1.45 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×82 specifications

dDepth14.3 in363.2 mm
bfFlange width10.1 in256.5 mm
twWeb thickness0.51 in13.0 mm
tfFlange thickness0.855 in21.7 mm
kDesign value1.45 in36.8 mm
kDetailing value1 11/16 in42.9 mm
k1Detailing value1 1/16 in27.0 mm
WWeight82 lb/ft122.0 kg/m
AArea24 in²15,484 mm²
IxMoment of inertia, strong axis881 in⁴36,670 cm⁴
ZxPlastic modulus, strong axis139 in³2,277.8 cm³
SxSection modulus, strong axis123 in³2,015.6 cm³
rxRadius of gyration, strong axis6.05 in153.7 mm
IyMoment of inertia, weak axis148 in⁴6,160.2 cm⁴
ZyPlastic modulus, weak axis44.8 in³734.1 cm³
SySection modulus, weak axis29.3 in³480.1 cm³
ryRadius of gyration, weak axis2.48 in63.0 mm
JTorsional constant5.07 in⁴211.03 cm⁴
bf/2tfFlange slenderness5.92
h/twWeb slenderness22.4
Metric designationW360×122

Also known as

W360×122

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.