Träger W18×106: Maße und Querschnittswerte
W-Profile (AISC) · W18: 18 in Nennhöhe
W18×106 ist ein AISC-Breitflanschprofil (W18: 18 in Nennhöhe). Es ist 18,7 in (475,0 mm) hoch, mit einem 11,2 in (284,5 mm) breiten Flansch, 0,59 in (15,0 mm) Stegdicke und 0,94 in (23,9 mm) Flanschdicke, und wiegt 106 lb/ft (157,7 kg/m). Fläche 31,1 in² (20.064 mm²); um die starke Achse Ix = 1.910 in⁴ (79.500,2 cm⁴), Sx = 204 in³ (3.343 cm³), Zx = 230 in³ (3.769 cm³).
- dHöhe
- 475,0 mm18,7 in18,7 in475,0 mm
- bfFlanschbreite
- 284,5 mm11,2 in11,2 in284,5 mm
- twStegdicke
- 15,0 mm0,59 in0,59 in15,0 mm
- tfFlanschdicke
- 23,9 mm0,94 in0,94 in23,9 mm
Zeichnung
Technische Daten W18×106
| dHöhe | 18,7 in475,0 mm |
|---|---|
| bfFlanschbreite | 11,2 in284,5 mm |
| twStegdicke | 0,59 in15,0 mm |
| tfFlanschdicke | 0,94 in23,9 mm |
| kBemessungswert | 1,34 in34,0 mm |
| kDetaillierungswert | 1 13/16 in46,0 mm |
| k1Detaillierungswert | 1 1/8 in28,6 mm |
| WGewicht | 106 lb/ft157,7 kg/m |
| AQuerschnittsfläche | 31,1 in²20.064 mm² |
| IxFlächenträgheitsmoment, starke Achse | 1.910 in⁴79.500,2 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 230 in³3.769 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 204 in³3.343 cm³ |
| rxTrägheitsradius, starke Achse | 7,84 in199,1 mm |
| IyFlächenträgheitsmoment, schwache Achse | 220 in⁴9.157,1 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 60,5 in³991,4 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 39,4 in³645,7 cm³ |
| ryTrägheitsradius, schwache Achse | 2,66 in67,6 mm |
| JTorsionsträgheitsmoment | 7,48 in⁴311,34 cm⁴ |
| bf/2tfFlanschschlankheit | 5,96 |
| h/twStegschlankheit | 27,2 |
| Metrische Bezeichnung | W460×158 |
Auch bekannt als
W460×158
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.