W18×106 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×106 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.7 in (475.0 mm) deep with a 11.2 in (284.5 mm) flange, a 0.59 in (15.0 mm) web and a 0.94 in (23.9 mm) flange, and weighs 106 lb/ft (157.7 kg/m). Area 31.1 in² (20,064 mm²); strong-axis Ix = 1,910 in⁴ (79,500.2 cm⁴), Sx = 204 in³ (3,343 cm³), Zx = 230 in³ (3,769 cm³).

dDepth
475.0 mm18.7 in18.7 in475.0 mm
bfFlange width
284.5 mm11.2 in11.2 in284.5 mm
twWeb thickness
15.0 mm0.59 in0.59 in15.0 mm
tfFlange thickness
23.9 mm0.94 in0.94 in23.9 mm

Drawing

284.5 mm11.2 in475.0 mm18.7 intf 23.9 mmtf 0.94 intw 15.0 mmtw 0.59 ink 34.0 mmk 1.34 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×106 specifications

dDepth18.7 in475.0 mm
bfFlange width11.2 in284.5 mm
twWeb thickness0.59 in15.0 mm
tfFlange thickness0.94 in23.9 mm
kDesign value1.34 in34.0 mm
kDetailing value1 13/16 in46.0 mm
k1Detailing value1 1/8 in28.6 mm
WWeight106 lb/ft157.7 kg/m
AArea31.1 in²20,064 mm²
IxMoment of inertia, strong axis1,910 in⁴79,500.2 cm⁴
ZxPlastic modulus, strong axis230 in³3,769 cm³
SxSection modulus, strong axis204 in³3,343 cm³
rxRadius of gyration, strong axis7.84 in199.1 mm
IyMoment of inertia, weak axis220 in⁴9,157.1 cm⁴
ZyPlastic modulus, weak axis60.5 in³991.4 cm³
SySection modulus, weak axis39.4 in³645.7 cm³
ryRadius of gyration, weak axis2.66 in67.6 mm
JTorsional constant7.48 in⁴311.34 cm⁴
bf/2tfFlange slenderness5.96
h/twWeb slenderness27.2
Metric designationW460×158

Also known as

W460×158

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.