Träger W18×50: Maße und Querschnittswerte
W-Profile (AISC) · W18: 18 in Nennhöhe
W18×50 ist ein AISC-Breitflanschprofil (W18: 18 in Nennhöhe). Es ist 18 in (457,2 mm) hoch, mit einem 7,5 in (190,5 mm) breiten Flansch, 0,355 in (9,0 mm) Stegdicke und 0,57 in (14,5 mm) Flanschdicke, und wiegt 50 lb/ft (74,4 kg/m). Fläche 14,7 in² (9.484 mm²); um die starke Achse Ix = 800 in⁴ (33.298,5 cm⁴), Sx = 88,9 in³ (1.456,8 cm³), Zx = 101 in³ (1.655,1 cm³).
- dHöhe
- 457,2 mm18 in18 in457,2 mm
- bfFlanschbreite
- 190,5 mm7,5 in7,5 in190,5 mm
- twStegdicke
- 9,0 mm0,355 in0,355 in9,0 mm
- tfFlanschdicke
- 14,5 mm0,57 in0,57 in14,5 mm
Zeichnung
Technische Daten W18×50
| dHöhe | 18 in457,2 mm |
|---|---|
| bfFlanschbreite | 7,5 in190,5 mm |
| twStegdicke | 0,355 in9,0 mm |
| tfFlanschdicke | 0,57 in14,5 mm |
| kBemessungswert | 0,972 in24,7 mm |
| kDetaillierungswert | 1 1/4 in31,8 mm |
| k1Detaillierungswert | 13/16 in20,6 mm |
| WGewicht | 50 lb/ft74,4 kg/m |
| AQuerschnittsfläche | 14,7 in²9.484 mm² |
| IxFlächenträgheitsmoment, starke Achse | 800 in⁴33.298,5 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 101 in³1.655,1 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 88,9 in³1.456,8 cm³ |
| rxTrägheitsradius, starke Achse | 7,38 in187,5 mm |
| IyFlächenträgheitsmoment, schwache Achse | 40,1 in⁴1.669,1 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 16,6 in³272 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 10,7 in³175,3 cm³ |
| ryTrägheitsradius, schwache Achse | 1,65 in41,9 mm |
| JTorsionsträgheitsmoment | 1,24 in⁴51,61 cm⁴ |
| bf/2tfFlanschschlankheit | 6,57 |
| h/twStegschlankheit | 45,2 |
| Metrische Bezeichnung | W460×74 |
Auch bekannt als
W460×74
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.