W18×50 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×50 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18 in (457.2 mm) deep with a 7.5 in (190.5 mm) flange, a 0.355 in (9.0 mm) web and a 0.57 in (14.5 mm) flange, and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); strong-axis Ix = 800 in⁴ (33,298.5 cm⁴), Sx = 88.9 in³ (1,456.8 cm³), Zx = 101 in³ (1,655.1 cm³).

dDepth
457.2 mm18 in18 in457.2 mm
bfFlange width
190.5 mm7.5 in7.5 in190.5 mm
twWeb thickness
9.0 mm0.355 in0.355 in9.0 mm
tfFlange thickness
14.5 mm0.57 in0.57 in14.5 mm

Drawing

190.5 mm7.5 in457.2 mm18 intf 14.5 mmtf 0.57 intw 9.0 mmtw 0.355 ink 24.7 mmk 0.972 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×50 specifications

dDepth18 in457.2 mm
bfFlange width7.5 in190.5 mm
twWeb thickness0.355 in9.0 mm
tfFlange thickness0.57 in14.5 mm
kDesign value0.972 in24.7 mm
kDetailing value1 1/4 in31.8 mm
k1Detailing value13/16 in20.6 mm
WWeight50 lb/ft74.4 kg/m
AArea14.7 in²9,484 mm²
IxMoment of inertia, strong axis800 in⁴33,298.5 cm⁴
ZxPlastic modulus, strong axis101 in³1,655.1 cm³
SxSection modulus, strong axis88.9 in³1,456.8 cm³
rxRadius of gyration, strong axis7.38 in187.5 mm
IyMoment of inertia, weak axis40.1 in⁴1,669.1 cm⁴
ZyPlastic modulus, weak axis16.6 in³272 cm³
SySection modulus, weak axis10.7 in³175.3 cm³
ryRadius of gyration, weak axis1.65 in41.9 mm
JTorsional constant1.24 in⁴51.61 cm⁴
bf/2tfFlange slenderness6.57
h/twWeb slenderness45.2
Metric designationW460×74

Also known as

W460×74

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.