Träger W18×60: Maße und Querschnittswerte
W-Profile (AISC) · W18: 18 in Nennhöhe
W18×60 ist ein AISC-Breitflanschprofil (W18: 18 in Nennhöhe). Es ist 18,2 in (462,3 mm) hoch, mit einem 7,56 in (192,0 mm) breiten Flansch, 0,415 in (10,5 mm) Stegdicke und 0,695 in (17,7 mm) Flanschdicke, und wiegt 60 lb/ft (89,3 kg/m). Fläche 17,6 in² (11.355 mm²); um die starke Achse Ix = 984 in⁴ (40.957,2 cm⁴), Sx = 108 in³ (1.769,8 cm³), Zx = 123 in³ (2.015,6 cm³).
- dHöhe
- 462,3 mm18,2 in18,2 in462,3 mm
- bfFlanschbreite
- 192,0 mm7,56 in7,56 in192,0 mm
- twStegdicke
- 10,5 mm0,415 in0,415 in10,5 mm
- tfFlanschdicke
- 17,7 mm0,695 in0,695 in17,7 mm
Zeichnung
Technische Daten W18×60
| dHöhe | 18,2 in462,3 mm |
|---|---|
| bfFlanschbreite | 7,56 in192,0 mm |
| twStegdicke | 0,415 in10,5 mm |
| tfFlanschdicke | 0,695 in17,7 mm |
| kBemessungswert | 1,1 in27,9 mm |
| kDetaillierungswert | 1 3/8 in34,9 mm |
| k1Detaillierungswert | 13/16 in20,6 mm |
| WGewicht | 60 lb/ft89,3 kg/m |
| AQuerschnittsfläche | 17,6 in²11.355 mm² |
| IxFlächenträgheitsmoment, starke Achse | 984 in⁴40.957,2 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 123 in³2.015,6 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 108 in³1.769,8 cm³ |
| rxTrägheitsradius, starke Achse | 7,47 in189,7 mm |
| IyFlächenträgheitsmoment, schwache Achse | 50,1 in⁴2.085,3 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 20,6 in³337,6 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 13,3 in³217,9 cm³ |
| ryTrägheitsradius, schwache Achse | 1,68 in42,7 mm |
| JTorsionsträgheitsmoment | 2,17 in⁴90,32 cm⁴ |
| bf/2tfFlanschschlankheit | 5,44 |
| h/twStegschlankheit | 38,7 |
| Metrische Bezeichnung | W460×89 |
Auch bekannt als
W460×89
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.