W18×60 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×60 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.2 in (462.3 mm) deep with a 7.56 in (192.0 mm) flange, a 0.415 in (10.5 mm) web and a 0.695 in (17.7 mm) flange, and weighs 60 lb/ft (89.3 kg/m). Area 17.6 in² (11,355 mm²); strong-axis Ix = 984 in⁴ (40,957.2 cm⁴), Sx = 108 in³ (1,769.8 cm³), Zx = 123 in³ (2,015.6 cm³).

dDepth
462.3 mm18.2 in18.2 in462.3 mm
bfFlange width
192.0 mm7.56 in7.56 in192.0 mm
twWeb thickness
10.5 mm0.415 in0.415 in10.5 mm
tfFlange thickness
17.7 mm0.695 in0.695 in17.7 mm

Drawing

192.0 mm7.56 in462.3 mm18.2 intf 17.7 mmtf 0.695 intw 10.5 mmtw 0.415 ink 27.9 mmk 1.1 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×60 specifications

dDepth18.2 in462.3 mm
bfFlange width7.56 in192.0 mm
twWeb thickness0.415 in10.5 mm
tfFlange thickness0.695 in17.7 mm
kDesign value1.1 in27.9 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value13/16 in20.6 mm
WWeight60 lb/ft89.3 kg/m
AArea17.6 in²11,355 mm²
IxMoment of inertia, strong axis984 in⁴40,957.2 cm⁴
ZxPlastic modulus, strong axis123 in³2,015.6 cm³
SxSection modulus, strong axis108 in³1,769.8 cm³
rxRadius of gyration, strong axis7.47 in189.7 mm
IyMoment of inertia, weak axis50.1 in⁴2,085.3 cm⁴
ZyPlastic modulus, weak axis20.6 in³337.6 cm³
SySection modulus, weak axis13.3 in³217.9 cm³
ryRadius of gyration, weak axis1.68 in42.7 mm
JTorsional constant2.17 in⁴90.32 cm⁴
bf/2tfFlange slenderness5.44
h/twWeb slenderness38.7
Metric designationW460×89

Also known as

W460×89

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.