Träger W18×86: Maße und Querschnittswerte
W-Profile (AISC) · W18: 18 in Nennhöhe
W18×86 ist ein AISC-Breitflanschprofil (W18: 18 in Nennhöhe). Es ist 18,4 in (467,4 mm) hoch, mit einem 11,1 in (281,9 mm) breiten Flansch, 0,48 in (12,2 mm) Stegdicke und 0,77 in (19,6 mm) Flanschdicke, und wiegt 86 lb/ft (128,0 kg/m). Fläche 25,3 in² (16.323 mm²); um die starke Achse Ix = 1.530 in⁴ (63.683,4 cm⁴), Sx = 166 in³ (2.720,3 cm³), Zx = 186 in³ (3.048 cm³).
- dHöhe
- 467,4 mm18,4 in18,4 in467,4 mm
- bfFlanschbreite
- 281,9 mm11,1 in11,1 in281,9 mm
- twStegdicke
- 12,2 mm0,48 in0,48 in12,2 mm
- tfFlanschdicke
- 19,6 mm0,77 in0,77 in19,6 mm
Zeichnung
Technische Daten W18×86
| dHöhe | 18,4 in467,4 mm |
|---|---|
| bfFlanschbreite | 11,1 in281,9 mm |
| twStegdicke | 0,48 in12,2 mm |
| tfFlanschdicke | 0,77 in19,6 mm |
| kBemessungswert | 1,17 in29,7 mm |
| kDetaillierungswert | 1 5/8 in41,3 mm |
| k1Detaillierungswert | 1 1/16 in27,0 mm |
| WGewicht | 86 lb/ft128,0 kg/m |
| AQuerschnittsfläche | 25,3 in²16.323 mm² |
| IxFlächenträgheitsmoment, starke Achse | 1.530 in⁴63.683,4 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 186 in³3.048 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 166 in³2.720,3 cm³ |
| rxTrägheitsradius, starke Achse | 7,77 in197,4 mm |
| IyFlächenträgheitsmoment, schwache Achse | 175 in⁴7.284 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 48,4 in³793,1 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 31,6 in³517,8 cm³ |
| ryTrägheitsradius, schwache Achse | 2,63 in66,8 mm |
| JTorsionsträgheitsmoment | 4,1 in⁴170,65 cm⁴ |
| bf/2tfFlanschschlankheit | 7,2 |
| h/twStegschlankheit | 33,4 |
| Metrische Bezeichnung | W460×128 |
Auch bekannt als
W460×128
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.