W18×86 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×86 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.4 in (467.4 mm) deep with a 11.1 in (281.9 mm) flange, a 0.48 in (12.2 mm) web and a 0.77 in (19.6 mm) flange, and weighs 86 lb/ft (128.0 kg/m). Area 25.3 in² (16,323 mm²); strong-axis Ix = 1,530 in⁴ (63,683.4 cm⁴), Sx = 166 in³ (2,720.3 cm³), Zx = 186 in³ (3,048 cm³).

dDepth
467.4 mm18.4 in18.4 in467.4 mm
bfFlange width
281.9 mm11.1 in11.1 in281.9 mm
twWeb thickness
12.2 mm0.48 in0.48 in12.2 mm
tfFlange thickness
19.6 mm0.77 in0.77 in19.6 mm

Drawing

281.9 mm11.1 in467.4 mm18.4 intf 19.6 mmtf 0.77 intw 12.2 mmtw 0.48 ink 29.7 mmk 1.17 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×86 specifications

dDepth18.4 in467.4 mm
bfFlange width11.1 in281.9 mm
twWeb thickness0.48 in12.2 mm
tfFlange thickness0.77 in19.6 mm
kDesign value1.17 in29.7 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value1 1/16 in27.0 mm
WWeight86 lb/ft128.0 kg/m
AArea25.3 in²16,323 mm²
IxMoment of inertia, strong axis1,530 in⁴63,683.4 cm⁴
ZxPlastic modulus, strong axis186 in³3,048 cm³
SxSection modulus, strong axis166 in³2,720.3 cm³
rxRadius of gyration, strong axis7.77 in197.4 mm
IyMoment of inertia, weak axis175 in⁴7,284 cm⁴
ZyPlastic modulus, weak axis48.4 in³793.1 cm³
SySection modulus, weak axis31.6 in³517.8 cm³
ryRadius of gyration, weak axis2.63 in66.8 mm
JTorsional constant4.1 in⁴170.65 cm⁴
bf/2tfFlange slenderness7.2
h/twWeb slenderness33.4
Metric designationW460×128

Also known as

W460×128

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.