Träger W36×170: Maße und Querschnittswerte
W-Profile (AISC) · W36: 36 in Nennhöhe
W36×170 ist ein AISC-Breitflanschprofil (W36: 36 in Nennhöhe). Es ist 36,2 in (919,5 mm) hoch, mit einem 12 in (304,8 mm) breiten Flansch, 0,68 in (17,3 mm) Stegdicke und 1,1 in (27,9 mm) Flanschdicke, und wiegt 170 lb/ft (253,0 kg/m). Fläche 50 in² (32.258 mm²); um die starke Achse Ix = 10.500 in⁴ (437.043 cm⁴), Sx = 581 in³ (9.520,9 cm³), Zx = 668 in³ (10.946,6 cm³).
- dHöhe
- 919,5 mm36,2 in36,2 in919,5 mm
- bfFlanschbreite
- 304,8 mm12 in12 in304,8 mm
- twStegdicke
- 17,3 mm0,68 in0,68 in17,3 mm
- tfFlanschdicke
- 27,9 mm1,1 in1,1 in27,9 mm
Zeichnung
Technische Daten W36×170
| dHöhe | 36,2 in919,5 mm |
|---|---|
| bfFlanschbreite | 12 in304,8 mm |
| twStegdicke | 0,68 in17,3 mm |
| tfFlanschdicke | 1,1 in27,9 mm |
| kBemessungswert | 1,85 in47,0 mm |
| kDetaillierungswert | 2 3/8 in60,3 mm |
| k1Detaillierungswert | 1 9/16 in39,7 mm |
| WGewicht | 170 lb/ft253,0 kg/m |
| AQuerschnittsfläche | 50 in²32.258 mm² |
| IxFlächenträgheitsmoment, starke Achse | 10.500 in⁴437.043 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 668 in³10.946,6 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 581 in³9.520,9 cm³ |
| rxTrägheitsradius, starke Achse | 14,5 in368,3 mm |
| IyFlächenträgheitsmoment, schwache Achse | 320 in⁴13.319,4 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 83,8 in³1.373,2 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 53,2 in³871,8 cm³ |
| ryTrägheitsradius, schwache Achse | 2,53 in64,3 mm |
| JTorsionsträgheitsmoment | 15,1 in⁴628,51 cm⁴ |
| bf/2tfFlanschschlankheit | 5,47 |
| h/twStegschlankheit | 47,7 |
| Metrische Bezeichnung | W920×253 |
Auch bekannt als
W920×253
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.