W36×170 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×170 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.2 in (919.5 mm) deep with a 12 in (304.8 mm) flange, a 0.68 in (17.3 mm) web and a 1.1 in (27.9 mm) flange, and weighs 170 lb/ft (253.0 kg/m). Area 50 in² (32,258 mm²); strong-axis Ix = 10,500 in⁴ (437,043 cm⁴), Sx = 581 in³ (9,520.9 cm³), Zx = 668 in³ (10,946.6 cm³).
- dDepth
- 919.5 mm36.2 in36.2 in919.5 mm
- bfFlange width
- 304.8 mm12 in12 in304.8 mm
- twWeb thickness
- 17.3 mm0.68 in0.68 in17.3 mm
- tfFlange thickness
- 27.9 mm1.1 in1.1 in27.9 mm
Drawing
W36×170 specifications
| dDepth | 36.2 in919.5 mm |
|---|---|
| bfFlange width | 12 in304.8 mm |
| twWeb thickness | 0.68 in17.3 mm |
| tfFlange thickness | 1.1 in27.9 mm |
| kDesign value | 1.85 in47.0 mm |
| kDetailing value | 2 3/8 in60.3 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 170 lb/ft253.0 kg/m |
| AArea | 50 in²32,258 mm² |
| IxMoment of inertia, strong axis | 10,500 in⁴437,043 cm⁴ |
| ZxPlastic modulus, strong axis | 668 in³10,946.6 cm³ |
| SxSection modulus, strong axis | 581 in³9,520.9 cm³ |
| rxRadius of gyration, strong axis | 14.5 in368.3 mm |
| IyMoment of inertia, weak axis | 320 in⁴13,319.4 cm⁴ |
| ZyPlastic modulus, weak axis | 83.8 in³1,373.2 cm³ |
| SySection modulus, weak axis | 53.2 in³871.8 cm³ |
| ryRadius of gyration, weak axis | 2.53 in64.3 mm |
| JTorsional constant | 15.1 in⁴628.51 cm⁴ |
| bf/2tfFlange slenderness | 5.47 |
| h/twWeb slenderness | 47.7 |
| Metric designation | W920×253 |
Also known as
W920×253
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.