Träger W6×9: Maße und Querschnittswerte
W-Profile (AISC) · W6: 6 in Nennhöhe
W6×9 ist ein AISC-Breitflanschprofil (W6: 6 in Nennhöhe). Es ist 5,9 in (149,9 mm) hoch, mit einem 3,94 in (100,1 mm) breiten Flansch, 0,17 in (4,3 mm) Stegdicke und 0,215 in (5,5 mm) Flanschdicke, und wiegt 9 lb/ft (13,4 kg/m). Fläche 2,68 in² (1.729 mm²); um die starke Achse Ix = 16,4 in⁴ (682,6 cm⁴), Sx = 5,56 in³ (91,1 cm³), Zx = 6,23 in³ (102,1 cm³).
- dHöhe
- 149,9 mm5,9 in5,9 in149,9 mm
- bfFlanschbreite
- 100,1 mm3,94 in3,94 in100,1 mm
- twStegdicke
- 4,3 mm0,17 in0,17 in4,3 mm
- tfFlanschdicke
- 5,5 mm0,215 in0,215 in5,5 mm
Zeichnung
Technische Daten W6×9
| dHöhe | 5,9 in149,9 mm |
|---|---|
| bfFlanschbreite | 3,94 in100,1 mm |
| twStegdicke | 0,17 in4,3 mm |
| tfFlanschdicke | 0,215 in5,5 mm |
| kBemessungswert | 0,465 in11,8 mm |
| kDetaillierungswert | 11/16 in17,5 mm |
| k1Detaillierungswert | 1/2 in12,7 mm |
| WGewicht | 9 lb/ft13,4 kg/m |
| AQuerschnittsfläche | 2,68 in²1.729 mm² |
| IxFlächenträgheitsmoment, starke Achse | 16,4 in⁴682,6 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 6,23 in³102,1 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 5,56 in³91,1 cm³ |
| rxTrägheitsradius, starke Achse | 2,47 in62,7 mm |
| IyFlächenträgheitsmoment, schwache Achse | 2,2 in⁴91,6 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 1,72 in³28,2 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 1,11 in³18,2 cm³ |
| ryTrägheitsradius, schwache Achse | 0,91 in23,0 mm |
| JTorsionsträgheitsmoment | 0,041 in⁴1,69 cm⁴ |
| bf/2tfFlanschschlankheit | 9,16 |
| h/twStegschlankheit | 29,2 |
| Metrische Bezeichnung | W150×13.5 |
Auch bekannt als
W150×13.5
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.