W6×9 Beam Dimensions & Properties

W Shapes (AISC) · W6: 6 in nominal depth

W6×9 is an AISC wide-flange shape (W6: 6 in nominal depth). It is 5.9 in (149.9 mm) deep with a 3.94 in (100.1 mm) flange, a 0.17 in (4.3 mm) web and a 0.215 in (5.5 mm) flange, and weighs 9 lb/ft (13.4 kg/m). Area 2.68 in² (1,729 mm²); strong-axis Ix = 16.4 in⁴ (682.6 cm⁴), Sx = 5.56 in³ (91.1 cm³), Zx = 6.23 in³ (102.1 cm³).

dDepth
149.9 mm5.9 in5.9 in149.9 mm
bfFlange width
100.1 mm3.94 in3.94 in100.1 mm
twWeb thickness
4.3 mm0.17 in0.17 in4.3 mm
tfFlange thickness
5.5 mm0.215 in0.215 in5.5 mm

Drawing

100.1 mm3.94 in149.9 mm5.9 intf 5.5 mmtf 0.215 intw 4.3 mmtw 0.17 ink 11.8 mmk 0.465 in
Drawn to scale · Dimensions in mmDimensions in inches

W6×9 specifications

dDepth5.9 in149.9 mm
bfFlange width3.94 in100.1 mm
twWeb thickness0.17 in4.3 mm
tfFlange thickness0.215 in5.5 mm
kDesign value0.465 in11.8 mm
kDetailing value11/16 in17.5 mm
k1Detailing value1/2 in12.7 mm
WWeight9 lb/ft13.4 kg/m
AArea2.68 in²1,729 mm²
IxMoment of inertia, strong axis16.4 in⁴682.6 cm⁴
ZxPlastic modulus, strong axis6.23 in³102.1 cm³
SxSection modulus, strong axis5.56 in³91.1 cm³
rxRadius of gyration, strong axis2.47 in62.7 mm
IyMoment of inertia, weak axis2.2 in⁴91.6 cm⁴
ZyPlastic modulus, weak axis1.72 in³28.2 cm³
SySection modulus, weak axis1.11 in³18.2 cm³
ryRadius of gyration, weak axis0.91 in23.0 mm
JTorsional constant0.041 in⁴1.69 cm⁴
bf/2tfFlange slenderness9.16
h/twWeb slenderness29.2
Metric designationW150×13.5

Also known as

W150×13.5

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.