Dimensi Profil Timing Belt XH

Timing Belt · Trapesium, inci (ISO 5296)

Timing belt XH (Trapesium, inci, ISO 5296) memiliki pitch 22,225 mm (0,875 in), tinggi gigi 6,35 mm (0,250 in), dan tinggi belt keseluruhan sekitar 11,2 mm (0,441 in). Lebar umum: 50.8, 76.2, 101.6 (2", 3", 4"). Puli dengan z gigi memiliki diameter pitch z × 22,225 mm / π.

pPitch
22,225 mm0,875 in0,875 in22,225 mm
hₜTinggi gigi
6,35 mm0,250 in0,250 in6,35 mm
hₛTinggi belt (tipikal)
11,2 mm0,441 in0,441 in11,2 mm

Gambar

garis pitchp = 22,225 mmp = 0,875 in11,2 mm0,441 in6,35 mm0,250 in2β = 40°
Dua pitch, gigi menghadap ke bawah. Gigi digambar dari lebar kaki dan sudut sisi.Sesuai skala · Dimensi dalam mmDimensi dalam inci

Spesifikasi XH

pPitch22,225 mm0,875 in
hₜTinggi gigi6,35 mm0,250 in
hₛTinggi belt (tipikal)11,2 mm0,441 in
sLebar gigi di kaki12,57 mm0,495 in
2βSudut sisi gigi40°
uPitch line differential (PLD)1,397 mm0,055 in
Profil gigiTrapesium
Lebar umum50.8, 76.2, 101.6 (2", 3", 4")

Semua profil timing belt

Bandingkan semua 22 profil di tabel Timing Belt →

Sumber

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Nilai terakhir diperiksa terhadap sumber-sumber ini pada 15 November 2026. · Cara kami memeriksa data

Nilai acuan untuk perencanaan dan identifikasi. Pastikan dimensi kritis dengan gambar teknik produsen atau edisi standar yang berlaku sebelum produksi.