XH Timing Belt Profile Dimensions

Timing Belts · Trapezoidal, inch (ISO 5296)

XH timing belts (Trapezoidal, inch, ISO 5296) have a 22.225 mm (0.875 in) pitch, a tooth height of 6.35 mm (0.250 in) and an overall belt height of about 11.2 mm (0.441 in). Common widths: 50.8, 76.2, 101.6 (2", 3", 4"). A pulley with z teeth has a pitch diameter of z × 22.225 mm / π.

pPitch
22.225 mm0.875 in0.875 in22.225 mm
hₜTooth height
6.35 mm0.250 in0.250 in6.35 mm
hₛBelt height (typical)
11.2 mm0.441 in0.441 in11.2 mm

Drawing

pitch linep = 22.225 mmp = 0.875 in11.2 mm0.441 in6.35 mm0.250 in2β = 40°
Two pitches, teeth down. Tooth drawn from root width and flank angle.Drawn to scale · Dimensions in mmDimensions in inches

XH specifications

pPitch22.225 mm0.875 in
hₜTooth height6.35 mm0.250 in
hₛBelt height (typical)11.2 mm0.441 in
sTooth width at root12.57 mm0.495 in
2βTooth flank angle40°
uPitch line differential (PLD)1.397 mm0.055 in
Tooth profileTrapezoidal
Common widths50.8, 76.2, 101.6 (2", 3", 4")

All timing belt profiles

Compare all 22 profiles in the Timing Belts chart →

Sources

  1. ISO 5296:2012, Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH
  2. ISO 13050:2014, Curvilinear toothed synchronous belt drive systems (HTD-type profiles)
  3. Gates: Industrial Power Transmission Preventive Maintenance manual (belt profile table)
  4. Optibelt: ALPHA POWER polyurethane timing belts, product range (T and AT profiles)
  5. Optibelt: Technical manual, rubber timing belt drives (STD, HTD, trapezoidal)
  6. Pfeifer Industries: Timing belt tooth profiles and pitches

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.