U-Profil UPE 180: Maße und Querschnittswerte

U-Profile (UPN, UPE, PFC, JIS) · UPE: europäische U-Profile, parallele Flansche

UPE 180 (UPE: europäische U-Profile, parallele Flansche) ist 180 mm (7,087 in) hoch, mit 75 mm (2,953 in) Flanschbreite, 5,5 mm (0,217 in) Steg und 10,5 mm (0,413 in) Flansch. Masse 19,7 kg/m (13,238 lb/ft), Fläche 25,1 cm² (3,891 in²); um die starke Achse I = 1.350 cm⁴ (32,43 in⁴), Wel = 150 cm³ (9,15 in³).

hHöhe
180 mm7,087 in7,087 in180 mm
bFlanschbreite
75 mm2,953 in2,953 in75 mm
twStegdicke
5,5 mm0,217 in0,217 in5,5 mm
tfFlanschdicke
10,5 mm0,413 in0,413 in10,5 mm

Zeichnung

75 mm2,953 in180 mm7,087 intf 10,5 mmtf 0,413 intw 5,5 mmtw 0,217 ine 2,47 cme 0,972 in
Maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten UPE 180

hHöhe180 mm7,087 in
bFlanschbreite75 mm2,953 in
twStegdicke5,5 mm0,217 in
tfFlanschdicke10,5 mm0,413 in
r1Ausrundungsradius12 mm0,472 in
GMasse19,7 kg/m13,238 lb/ft
AQuerschnittsfläche25,1 cm²3,891 in²
eSchwerpunktabstand vom Stegrücken2,47 cm0,972 in
IyFlächenträgheitsmoment, starke Achse1.350 cm⁴32,43 in⁴
Wel,yElastisches Widerstandsmoment, starke Achse150 cm³9,15 in³
Wpl,yPlastisches Widerstandsmoment, starke Achse173 cm³10,56 in³
iyTrägheitsradius, starke Achse7,34 cm2,890 in
IzFlächenträgheitsmoment, schwache Achse144 cm⁴3,46 in⁴
Wel,zElastisches Widerstandsmoment, schwache Achse29 cm³1,77 in³
izTrägheitsradius, schwache Achse2,39 cm0,941 in

U-Profile etwa gleicher Höhe in anderen Reihen

Alle Größen von U-Profile (UPN, UPE, PFC, JIS)

Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →

Quellen

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.