UPE 180 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges
UPE 180 (UPE: European channels, parallel flanges) is 180 mm (7.087 in) deep with a 75 mm (2.953 in) flange, a 5.5 mm (0.217 in) web and a 10.5 mm (0.413 in) flange. Mass 19.7 kg/m (13.238 lb/ft), area 25.1 cm² (3.891 in²); strong-axis I = 1,350 cm⁴ (32.43 in⁴), Wel = 150 cm³ (9.15 in³).
- hDepth
- 180 mm7.087 in7.087 in180 mm
- bFlange width
- 75 mm2.953 in2.953 in75 mm
- twWeb thickness
- 5.5 mm0.217 in0.217 in5.5 mm
- tfFlange thickness
- 10.5 mm0.413 in0.413 in10.5 mm
Drawing
UPE 180 specifications
| hDepth | 180 mm7.087 in |
|---|---|
| bFlange width | 75 mm2.953 in |
| twWeb thickness | 5.5 mm0.217 in |
| tfFlange thickness | 10.5 mm0.413 in |
| r1Root radius | 12 mm0.472 in |
| GMass | 19.7 kg/m13.238 lb/ft |
| AArea | 25.1 cm²3.891 in² |
| eCentroid from back of web | 2.47 cm0.972 in |
| IyMoment of inertia, strong axis | 1,350 cm⁴32.43 in⁴ |
| Wel,yElastic modulus, strong axis | 150 cm³9.15 in³ |
| Wpl,yPlastic modulus, strong axis | 173 cm³10.56 in³ |
| iyRadius of gyration, strong axis | 7.34 cm2.890 in |
| IzMoment of inertia, weak axis | 144 cm⁴3.46 in⁴ |
| Wel,zElastic modulus, weak axis | 29 cm³1.77 in³ |
| izRadius of gyration, weak axis | 2.39 cm0.941 in |
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.