U-Profil UPN 350: Maße und Querschnittswerte
U-Profile (UPN, UPE, PFC, JIS) · UPN: europäische U-Profile, geneigte Flansche (EN 10279, DIN 1026-1)
UPN 350 (UPN: europäische U-Profile, geneigte Flansche, EN 10279, DIN 1026-1) ist 350 mm (13,780 in) hoch, mit 100 mm (3,937 in) Flanschbreite, 14 mm (0,551 in) Steg und 16 mm (0,630 in) Flansch. Masse 60,6 kg/m (40,721 lb/ft), Fläche 77,3 cm² (11,982 in²); um die starke Achse I = 12.800 cm⁴ (307,52 in⁴), Wel = 734 cm³ (44,79 in³).
- hHöhe
- 350 mm13,780 in13,780 in350 mm
- bFlanschbreite
- 100 mm3,937 in3,937 in100 mm
- twStegdicke
- 14 mm0,551 in0,551 in14 mm
- tfFlanschdicke
- 16 mm0,630 in0,630 in16 mm
Zeichnung
Technische Daten UPN 350
| hHöhe | 350 mm13,780 in |
|---|---|
| bFlanschbreite | 100 mm3,937 in |
| twStegdicke | 14 mm0,551 in |
| tfFlanschdicke | 16 mm0,630 in |
| r1Ausrundungsradius | 16 mm0,630 in |
| r2Flanschkantenradius | 8 mm0,315 in |
| GMasse | 60,6 kg/m40,721 lb/ft |
| AQuerschnittsfläche | 77,3 cm²11,982 in² |
| IyFlächenträgheitsmoment, starke Achse | 12.800 cm⁴307,52 in⁴ |
| Wel,yElastisches Widerstandsmoment, starke Achse | 734 cm³44,79 in³ |
| Wpl,yPlastisches Widerstandsmoment, starke Achse | 918 cm³56,02 in³ |
| iyTrägheitsradius, starke Achse | 12,9 cm5,079 in |
| IzFlächenträgheitsmoment, schwache Achse | 570 cm⁴13,69 in⁴ |
| Wel,zElastisches Widerstandsmoment, schwache Achse | 75 cm³4,58 in³ |
| izTrägheitsradius, schwache Achse | 2,72 cm1,071 in |
Auch bekannt als
U-Profile etwa gleicher Höhe in anderen Reihen
Alle Größen von U-Profile (UPN, UPE, PFC, JIS)
Alle 58 Profile in der Tabelle U-Profile (UPN, UPE, PFC, JIS) vergleichen →
Quellen
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.