UPN 350 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)

UPN 350 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 350 mm (13.780 in) deep with a 100 mm (3.937 in) flange, a 14 mm (0.551 in) web and a 16 mm (0.630 in) flange. Mass 60.6 kg/m (40.721 lb/ft), area 77.3 cm² (11.982 in²); strong-axis I = 12,800 cm⁴ (307.52 in⁴), Wel = 734 cm³ (44.79 in³).

hDepth
350 mm13.780 in13.780 in350 mm
bFlange width
100 mm3.937 in3.937 in100 mm
twWeb thickness
14 mm0.551 in0.551 in14 mm
tfFlange thickness
16 mm0.630 in0.630 in16 mm

Drawing

100 mm3.937 in350 mm13.780 intf 16 mmtf 0.630 intw 14 mmtw 0.551 inr1 16 mmr1 0.630 in
Drawn to scale · Dimensions in mmDimensions in inches

UPN 350 specifications

hDepth350 mm13.780 in
bFlange width100 mm3.937 in
twWeb thickness14 mm0.551 in
tfFlange thickness16 mm0.630 in
r1Root radius16 mm0.630 in
r2Toe radius8 mm0.315 in
GMass60.6 kg/m40.721 lb/ft
AArea77.3 cm²11.982 in²
IyMoment of inertia, strong axis12,800 cm⁴307.52 in⁴
Wel,yElastic modulus, strong axis734 cm³44.79 in³
Wpl,yPlastic modulus, strong axis918 cm³56.02 in³
iyRadius of gyration, strong axis12.9 cm5.079 in
IzMoment of inertia, weak axis570 cm⁴13.69 in⁴
Wel,zElastic modulus, weak axis75 cm³4.58 in³
izRadius of gyration, weak axis2.72 cm1.071 in

Also known as

U350UNP350

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.