Modul 1.125 Zahnrad: Maße

Zahnradmodule · Module nach ISO 54, Reihe I und II

Ein Zahnrad mit Modul 1.125 hat eine Teilung von 3,534 mm (0,1391 in) und eine Zahnhöhe von 2,5313 mm (0,0997 in), Kopfhöhe 1,125 mm (0,0443 in), Fußhöhe 1,4063 mm (0,0554 in) beim Bezugsprofil nach ISO 53 mit 20° Eingriffswinkel. Teilkreisdurchmesser = Zähnezahl × 1,125 mm. Der entsprechende Diametral Pitch ist 22,58: das nächste Zollzahnrad, 24 DP, kämmt nicht damit.

mModul
1,125 mm0,0443 in0,0443 in1,125 mm
pTeilung (πm)
3,534 mm0,1391 in0,1391 in3,534 mm
hZahnhöhe (2.25 m)
2,5313 mm0,0997 in0,0997 in2,5313 mm
DPEntsprechender Diametral Pitch (25.4/m)
22,58

Zeichnung

Profilbezugsliniep 3,534 mmp 0,1391 ins 1,767 mms 0,0696 inh 2,5313 mmh 0,0997 inha 1,125 mmha 0,0443 inhf 1,4063 mmhf 0,0554 in20°
KopfkreisTeilkreisGrundkreisFußkreisZahnrad mit 20 Zähnen, Evolventenflanken
Proportional, nicht maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten Modul 1.125

mModul1,125 mm0,0443 in
ReiheII
pTeilung (πm)3,534 mm0,1391 in
sZahndicke (πm/2)1,767 mm0,0696 in
haKopfhöhe (1 m)1,125 mm0,0443 in
hfFußhöhe (1.25 m)1,4063 mm0,0554 in
hZahnhöhe (2.25 m)2,5313 mm0,0997 in
cKopfspiel (0.25 m)0,2813 mm0,0111 in
DPEntsprechender Diametral Pitch (25.4/m)22,58
Nächster Norm-DP24

Auch bekannt als

M1.125MOD1.125

Alle Zahnradmodule

Alle 37 Module in der Tabelle Zahnradmodule vergleichen →

Quellen

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.