Module 1.125 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1.125 gear has a circular pitch of 3.534 mm (0.1391 in) and a whole tooth depth of 2.5313 mm (0.0997 in), addendum 1.125 mm (0.0443 in), dedendum 1.4063 mm (0.0554 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1.125 mm. The equivalent diametral pitch is 22.58. The nearest inch gear, 24 DP, does not mesh with it.

mModule
1.125 mm0.0443 in0.0443 in1.125 mm
pCircular pitch (πm)
3.534 mm0.1391 in0.1391 in3.534 mm
hWhole depth (2.25 m)
2.5313 mm0.0997 in0.0997 in2.5313 mm
DPEquivalent diametral pitch (25.4/m)
22.58

Drawing

Pitch linep 3.534 mmp 0.1391 ins 1.767 mms 0.0696 inh 2.5313 mmh 0.0997 inha 1.125 mmha 0.0443 inhf 1.4063 mmhf 0.0554 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1.125 specifications

mModule1.125 mm0.0443 in
SeriesII
pCircular pitch (πm)3.534 mm0.1391 in
sTooth thickness (πm/2)1.767 mm0.0696 in
haAddendum (1 m)1.125 mm0.0443 in
hfDedendum (1.25 m)1.4063 mm0.0554 in
hWhole depth (2.25 m)2.5313 mm0.0997 in
cBottom clearance (0.25 m)0.2813 mm0.0111 in
DPEquivalent diametral pitch (25.4/m)22.58
Nearest standard DP24

Also known as

M1.125MOD1.125

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.