Modul 1.25 Zahnrad: Maße

Zahnradmodule · Module nach ISO 54, Reihe I und II

Ein Zahnrad mit Modul 1.25 hat eine Teilung von 3,927 mm (0,1546 in) und eine Zahnhöhe von 2,8125 mm (0,1107 in), Kopfhöhe 1,25 mm (0,0492 in), Fußhöhe 1,5625 mm (0,0615 in) beim Bezugsprofil nach ISO 53 mit 20° Eingriffswinkel. Teilkreisdurchmesser = Zähnezahl × 1,25 mm. Der entsprechende Diametral Pitch ist 20,32: das nächste Zollzahnrad, 20 DP, kämmt nicht damit.

mModul
1,25 mm0,0492 in0,0492 in1,25 mm
pTeilung (πm)
3,927 mm0,1546 in0,1546 in3,927 mm
hZahnhöhe (2.25 m)
2,8125 mm0,1107 in0,1107 in2,8125 mm
DPEntsprechender Diametral Pitch (25.4/m)
20,32

Zeichnung

Profilbezugsliniep 3,927 mmp 0,1546 ins 1,964 mms 0,0773 inh 2,8125 mmh 0,1107 inha 1,25 mmha 0,0492 inhf 1,5625 mmhf 0,0615 in20°
KopfkreisTeilkreisGrundkreisFußkreisZahnrad mit 20 Zähnen, Evolventenflanken
Proportional, nicht maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten Modul 1.25

mModul1,25 mm0,0492 in
ReiheI
pTeilung (πm)3,927 mm0,1546 in
sZahndicke (πm/2)1,964 mm0,0773 in
haKopfhöhe (1 m)1,25 mm0,0492 in
hfFußhöhe (1.25 m)1,5625 mm0,0615 in
hZahnhöhe (2.25 m)2,8125 mm0,1107 in
cKopfspiel (0.25 m)0,3125 mm0,0123 in
DPEntsprechender Diametral Pitch (25.4/m)20,32
Nächster Norm-DP20

Auch bekannt als

M1.25MOD1.25

Alle Zahnradmodule

Alle 37 Module in der Tabelle Zahnradmodule vergleichen →

Quellen

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.