Modul 1.375 Zahnrad: Maße

Zahnradmodule · Module nach ISO 54, Reihe I und II

Ein Zahnrad mit Modul 1.375 hat eine Teilung von 4,320 mm (0,1701 in) und eine Zahnhöhe von 3,0938 mm (0,1218 in), Kopfhöhe 1,375 mm (0,0541 in), Fußhöhe 1,7188 mm (0,0677 in) beim Bezugsprofil nach ISO 53 mit 20° Eingriffswinkel. Teilkreisdurchmesser = Zähnezahl × 1,375 mm. Der entsprechende Diametral Pitch ist 18,47: das nächste Zollzahnrad, 18 DP, kämmt nicht damit.

mModul
1,375 mm0,0541 in0,0541 in1,375 mm
pTeilung (πm)
4,320 mm0,1701 in0,1701 in4,320 mm
hZahnhöhe (2.25 m)
3,0938 mm0,1218 in0,1218 in3,0938 mm
DPEntsprechender Diametral Pitch (25.4/m)
18,47

Zeichnung

Profilbezugsliniep 4,320 mmp 0,1701 ins 2,160 mms 0,0850 inh 3,0938 mmh 0,1218 inha 1,375 mmha 0,0541 inhf 1,7188 mmhf 0,0677 in20°
KopfkreisTeilkreisGrundkreisFußkreisZahnrad mit 20 Zähnen, Evolventenflanken
Proportional, nicht maßstabsgetreu · Maße in mmMaße in Zoll

Technische Daten Modul 1.375

mModul1,375 mm0,0541 in
ReiheII
pTeilung (πm)4,320 mm0,1701 in
sZahndicke (πm/2)2,160 mm0,0850 in
haKopfhöhe (1 m)1,375 mm0,0541 in
hfFußhöhe (1.25 m)1,7188 mm0,0677 in
hZahnhöhe (2.25 m)3,0938 mm0,1218 in
cKopfspiel (0.25 m)0,3438 mm0,0135 in
DPEntsprechender Diametral Pitch (25.4/m)18,47
Nächster Norm-DP18

Auch bekannt als

M1.375MOD1.375

Alle Zahnradmodule

Alle 37 Module in der Tabelle Zahnradmodule vergleichen →

Quellen

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten

Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.