Module 1.375 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1.375 gear has a circular pitch of 4.320 mm (0.1701 in) and a whole tooth depth of 3.0938 mm (0.1218 in), addendum 1.375 mm (0.0541 in), dedendum 1.7188 mm (0.0677 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1.375 mm. The equivalent diametral pitch is 18.47. The nearest inch gear, 18 DP, does not mesh with it.

mModule
1.375 mm0.0541 in0.0541 in1.375 mm
pCircular pitch (πm)
4.320 mm0.1701 in0.1701 in4.320 mm
hWhole depth (2.25 m)
3.0938 mm0.1218 in0.1218 in3.0938 mm
DPEquivalent diametral pitch (25.4/m)
18.47

Drawing

Pitch linep 4.320 mmp 0.1701 ins 2.160 mms 0.0850 inh 3.0938 mmh 0.1218 inha 1.375 mmha 0.0541 inhf 1.7188 mmhf 0.0677 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1.375 specifications

mModule1.375 mm0.0541 in
SeriesII
pCircular pitch (πm)4.320 mm0.1701 in
sTooth thickness (πm/2)2.160 mm0.0850 in
haAddendum (1 m)1.375 mm0.0541 in
hfDedendum (1.25 m)1.7188 mm0.0677 in
hWhole depth (2.25 m)3.0938 mm0.1218 in
cBottom clearance (0.25 m)0.3438 mm0.0135 in
DPEquivalent diametral pitch (25.4/m)18.47
Nearest standard DP18

Also known as

M1.375MOD1.375

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.