Träger W12×30: Maße und Querschnittswerte
W-Profile (AISC) · W12: 12 in Nennhöhe
W12×30 ist ein AISC-Breitflanschprofil (W12: 12 in Nennhöhe). Es ist 12,3 in (312,4 mm) hoch, mit einem 6,52 in (165,6 mm) breiten Flansch, 0,26 in (6,6 mm) Stegdicke und 0,44 in (11,2 mm) Flanschdicke, und wiegt 30 lb/ft (44,6 kg/m). Fläche 8,79 in² (5.671 mm²); um die starke Achse Ix = 238 in⁴ (9.906,3 cm⁴), Sx = 38,6 in³ (632,5 cm³), Zx = 43,1 in³ (706,3 cm³).
- dHöhe
- 312,4 mm12,3 in12,3 in312,4 mm
- bfFlanschbreite
- 165,6 mm6,52 in6,52 in165,6 mm
- twStegdicke
- 6,6 mm0,26 in0,26 in6,6 mm
- tfFlanschdicke
- 11,2 mm0,44 in0,44 in11,2 mm
Zeichnung
Technische Daten W12×30
| dHöhe | 12,3 in312,4 mm |
|---|---|
| bfFlanschbreite | 6,52 in165,6 mm |
| twStegdicke | 0,26 in6,6 mm |
| tfFlanschdicke | 0,44 in11,2 mm |
| kBemessungswert | 0,74 in18,8 mm |
| kDetaillierungswert | 1 1/8 in28,6 mm |
| k1Detaillierungswert | 3/4 in19,0 mm |
| WGewicht | 30 lb/ft44,6 kg/m |
| AQuerschnittsfläche | 8,79 in²5.671 mm² |
| IxFlächenträgheitsmoment, starke Achse | 238 in⁴9.906,3 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 43,1 in³706,3 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 38,6 in³632,5 cm³ |
| rxTrägheitsradius, starke Achse | 5,21 in132,3 mm |
| IyFlächenträgheitsmoment, schwache Achse | 20,3 in⁴844,9 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 9,56 in³156,7 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 6,24 in³102,3 cm³ |
| ryTrägheitsradius, schwache Achse | 1,52 in38,6 mm |
| JTorsionsträgheitsmoment | 0,457 in⁴19,02 cm⁴ |
| bf/2tfFlanschschlankheit | 7,41 |
| h/twStegschlankheit | 41,8 |
| Metrische Bezeichnung | W310×44.5 |
Auch bekannt als
W310×44.5
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.