Träger W10×30: Maße und Querschnittswerte
W-Profile (AISC) · W10: 10 in Nennhöhe
W10×30 ist ein AISC-Breitflanschprofil (W10: 10 in Nennhöhe). Es ist 10,5 in (266,7 mm) hoch, mit einem 5,81 in (147,6 mm) breiten Flansch, 0,3 in (7,6 mm) Stegdicke und 0,51 in (13,0 mm) Flanschdicke, und wiegt 30 lb/ft (44,6 kg/m). Fläche 8,84 in² (5.703 mm²); um die starke Achse Ix = 170 in⁴ (7.075,9 cm⁴), Sx = 32,4 in³ (530,9 cm³), Zx = 36,6 in³ (599,8 cm³).
- dHöhe
- 266,7 mm10,5 in10,5 in266,7 mm
- bfFlanschbreite
- 147,6 mm5,81 in5,81 in147,6 mm
- twStegdicke
- 7,6 mm0,3 in0,3 in7,6 mm
- tfFlanschdicke
- 13,0 mm0,51 in0,51 in13,0 mm
Zeichnung
Technische Daten W10×30
| dHöhe | 10,5 in266,7 mm |
|---|---|
| bfFlanschbreite | 5,81 in147,6 mm |
| twStegdicke | 0,3 in7,6 mm |
| tfFlanschdicke | 0,51 in13,0 mm |
| kBemessungswert | 0,81 in20,6 mm |
| kDetaillierungswert | 1 1/8 in28,6 mm |
| k1Detaillierungswert | 11/16 in17,5 mm |
| WGewicht | 30 lb/ft44,6 kg/m |
| AQuerschnittsfläche | 8,84 in²5.703 mm² |
| IxFlächenträgheitsmoment, starke Achse | 170 in⁴7.075,9 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 36,6 in³599,8 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 32,4 in³530,9 cm³ |
| rxTrägheitsradius, starke Achse | 4,38 in111,3 mm |
| IyFlächenträgheitsmoment, schwache Achse | 16,7 in⁴695,1 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 8,84 in³144,9 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 5,75 in³94,2 cm³ |
| ryTrägheitsradius, schwache Achse | 1,37 in34,8 mm |
| JTorsionsträgheitsmoment | 0,622 in⁴25,89 cm⁴ |
| bf/2tfFlanschschlankheit | 5,7 |
| h/twStegschlankheit | 29,5 |
| Metrische Bezeichnung | W250×44.8 |
Auch bekannt als
W250×44.8
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.