W12×30 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×30 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.3 in (312.4 mm) deep with a 6.52 in (165.6 mm) flange, a 0.26 in (6.6 mm) web and a 0.44 in (11.2 mm) flange, and weighs 30 lb/ft (44.6 kg/m). Area 8.79 in² (5,671 mm²); strong-axis Ix = 238 in⁴ (9,906.3 cm⁴), Sx = 38.6 in³ (632.5 cm³), Zx = 43.1 in³ (706.3 cm³).

dDepth
312.4 mm12.3 in12.3 in312.4 mm
bfFlange width
165.6 mm6.52 in6.52 in165.6 mm
twWeb thickness
6.6 mm0.26 in0.26 in6.6 mm
tfFlange thickness
11.2 mm0.44 in0.44 in11.2 mm

Drawing

165.6 mm6.52 in312.4 mm12.3 intf 11.2 mmtf 0.44 intw 6.6 mmtw 0.26 ink 18.8 mmk 0.74 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×30 specifications

dDepth12.3 in312.4 mm
bfFlange width6.52 in165.6 mm
twWeb thickness0.26 in6.6 mm
tfFlange thickness0.44 in11.2 mm
kDesign value0.74 in18.8 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight30 lb/ft44.6 kg/m
AArea8.79 in²5,671 mm²
IxMoment of inertia, strong axis238 in⁴9,906.3 cm⁴
ZxPlastic modulus, strong axis43.1 in³706.3 cm³
SxSection modulus, strong axis38.6 in³632.5 cm³
rxRadius of gyration, strong axis5.21 in132.3 mm
IyMoment of inertia, weak axis20.3 in⁴844.9 cm⁴
ZyPlastic modulus, weak axis9.56 in³156.7 cm³
SySection modulus, weak axis6.24 in³102.3 cm³
ryRadius of gyration, weak axis1.52 in38.6 mm
JTorsional constant0.457 in⁴19.02 cm⁴
bf/2tfFlange slenderness7.41
h/twWeb slenderness41.8
Metric designationW310×44.5

Also known as

W310×44.5

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.