Träger W12×40: Maße und Querschnittswerte
W-Profile (AISC) · W12: 12 in Nennhöhe
W12×40 ist ein AISC-Breitflanschprofil (W12: 12 in Nennhöhe). Es ist 11,9 in (302,3 mm) hoch, mit einem 8,01 in (203,5 mm) breiten Flansch, 0,295 in (7,5 mm) Stegdicke und 0,515 in (13,1 mm) Flanschdicke, und wiegt 40 lb/ft (59,5 kg/m). Fläche 11,7 in² (7.548 mm²); um die starke Achse Ix = 307 in⁴ (12.778,3 cm⁴), Sx = 51,5 in³ (843,9 cm³), Zx = 57 in³ (934,1 cm³).
- dHöhe
- 302,3 mm11,9 in11,9 in302,3 mm
- bfFlanschbreite
- 203,5 mm8,01 in8,01 in203,5 mm
- twStegdicke
- 7,5 mm0,295 in0,295 in7,5 mm
- tfFlanschdicke
- 13,1 mm0,515 in0,515 in13,1 mm
Zeichnung
Technische Daten W12×40
| dHöhe | 11,9 in302,3 mm |
|---|---|
| bfFlanschbreite | 8,01 in203,5 mm |
| twStegdicke | 0,295 in7,5 mm |
| tfFlanschdicke | 0,515 in13,1 mm |
| kBemessungswert | 1,02 in25,9 mm |
| kDetaillierungswert | 1 3/8 in34,9 mm |
| k1Detaillierungswert | 7/8 in22,2 mm |
| WGewicht | 40 lb/ft59,5 kg/m |
| AQuerschnittsfläche | 11,7 in²7.548 mm² |
| IxFlächenträgheitsmoment, starke Achse | 307 in⁴12.778,3 cm⁴ |
| ZxPlastisches Widerstandsmoment, starke Achse | 57 in³934,1 cm³ |
| SxElastisches Widerstandsmoment, starke Achse | 51,5 in³843,9 cm³ |
| rxTrägheitsradius, starke Achse | 5,13 in130,3 mm |
| IyFlächenträgheitsmoment, schwache Achse | 44,1 in⁴1.835,6 cm⁴ |
| ZyPlastisches Widerstandsmoment, schwache Achse | 16,8 in³275,3 cm³ |
| SyElastisches Widerstandsmoment, schwache Achse | 11 in³180,3 cm³ |
| ryTrägheitsradius, schwache Achse | 1,94 in49,3 mm |
| JTorsionsträgheitsmoment | 0,906 in⁴37,71 cm⁴ |
| bf/2tfFlanschschlankheit | 7,77 |
| h/twStegschlankheit | 33,6 |
| Metrische Bezeichnung | W310×60 |
Auch bekannt als
W310×60
W-Profile mit etwa gleichem Gewicht in anderen Höhen
Alle Größen von W-Profile (AISC)
Alle 289 Profile in der Tabelle W-Profile (AISC) vergleichen →
Quellen
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Werte zuletzt am 15. November 2026 anhand dieser Quellen geprüft. · So prüfen wir die Daten
Richtwerte für Planung und Identifikation. Prüfen Sie kritische Maße vor der Fertigung anhand der Herstellerzeichnung oder der aktuellen Ausgabe der Norm.