W12×40 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×40 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 11.9 in (302.3 mm) deep with a 8.01 in (203.5 mm) flange, a 0.295 in (7.5 mm) web and a 0.515 in (13.1 mm) flange, and weighs 40 lb/ft (59.5 kg/m). Area 11.7 in² (7,548 mm²); strong-axis Ix = 307 in⁴ (12,778.3 cm⁴), Sx = 51.5 in³ (843.9 cm³), Zx = 57 in³ (934.1 cm³).

dDepth
302.3 mm11.9 in11.9 in302.3 mm
bfFlange width
203.5 mm8.01 in8.01 in203.5 mm
twWeb thickness
7.5 mm0.295 in0.295 in7.5 mm
tfFlange thickness
13.1 mm0.515 in0.515 in13.1 mm

Drawing

203.5 mm8.01 in302.3 mm11.9 intf 13.1 mmtf 0.515 intw 7.5 mmtw 0.295 ink 25.9 mmk 1.02 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×40 specifications

dDepth11.9 in302.3 mm
bfFlange width8.01 in203.5 mm
twWeb thickness0.295 in7.5 mm
tfFlange thickness0.515 in13.1 mm
kDesign value1.02 in25.9 mm
kDetailing value1 3/8 in34.9 mm
k1Detailing value7/8 in22.2 mm
WWeight40 lb/ft59.5 kg/m
AArea11.7 in²7,548 mm²
IxMoment of inertia, strong axis307 in⁴12,778.3 cm⁴
ZxPlastic modulus, strong axis57 in³934.1 cm³
SxSection modulus, strong axis51.5 in³843.9 cm³
rxRadius of gyration, strong axis5.13 in130.3 mm
IyMoment of inertia, weak axis44.1 in⁴1,835.6 cm⁴
ZyPlastic modulus, weak axis16.8 in³275.3 cm³
SySection modulus, weak axis11 in³180.3 cm³
ryRadius of gyration, weak axis1.94 in49.3 mm
JTorsional constant0.906 in⁴37.71 cm⁴
bf/2tfFlange slenderness7.77
h/twWeb slenderness33.6
Metric designationW310×60

Also known as

W310×60

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.